Overclock.net banner

1 - 8 of 8 Posts

·
Registered
Joined
·
922 Posts
Discussion Starter #1
just wonderd if theres a way around it guys I have 1.4v core all the others bumped up to about the right volts extra fans on ram nb vr's ect cpu is 55*c p95 @ 3.8 400*9.5 1600 fsb thanks

p.s. I don't want to upgrade I like my board/cpu combo
biggrin.gif


don't know if I posted in the right place sorry if I havnt
 

·
Registered
Joined
·
1,199 Posts
It could be after 400mhz you reach a FSB Wall,

i remember form the socket 775 Ocing days that increasing the PCI-Ex Frequency can improve your maximum FSB,

Lets say you increase the PCI-Ex to 101mhz, that could allow 400-404mhz,

on my old motherboard PCI-Ex on 104mhz allowed to to boot 436mhz fsb instead of the maximum 400mhz
 

·
Registered
Joined
·
922 Posts
Discussion Starter #4
thank you booted 485fsb couldn't get stable need better ram I guess stable at 420*9.5 1.3v core 1.9v ram 1.22v nb
smile.gif
 

·
Registered
Joined
·
922 Posts
Discussion Starter #5
thank you booted 485fsb couldn't get stable need better ram I guess stable at 420*9.5 1.3v core 1.9v ram 1.22v nb
smile.gif
 

·
Registered
Joined
·
1,199 Posts
Nice to hear,

How high did you put the PCI-EX speed setting?

Because there are more parts connected to that bus speed, so its smart not to go over 110mhz, but that probably isnt needed anyway
 

·
Registered
Joined
·
922 Posts
Discussion Starter #7
106 and I pushed 499fsb boots but bsod on 1.3volt but I think its ram as I put 1.4volt core n 2.1volt ram still same
redface.gif
 

·
Registered
Joined
·
922 Posts
Discussion Starter #8
i also pushed an intel xeon l5238 modded motherboard and chip to fit and pushed that to 420 stable was 3.2g 420 6mb and it was delided load was 50 with a quad heat pipe cooler from an amd 955 be 125watt
tongue.gif
great heat sinks just loud
 
1 - 8 of 8 Posts
Top