Overclock.net banner
1 - 1 of 1 Posts

· Registered
Joined
·
4,067 Posts
Also keep in mind that an SSO bearing is an oil pressure bearing so cracking the seal on the bearing.

1) voids your warranty, not that it matters if you are looking to paint

2) Will greatly damage the life cycle and you will constantly be replacing the oil in the bearing because it will seep out.

You see these fans don't go together the same as other fans the fan hub and bearing assembly are separate to the fan frame. So when it come apart it comes out in one piece. But then again you go back to result (2).

I have seen them painted before but each time has resulted in me face palming.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top