Overclock.net banner

Phenom 9600 BE Tempature reading issue, -eMachine

523 Views 4 Replies 2 Participants Last post by  Jolting
I have a AMD Phenom 9600 BE with a ASUS M3A78-EM board in a emachine case with some pretty outrageous cooling solution (pics will be showed when I can upload). So anyways for core temp it only shows 1 temp. Real temp isnt supported by the cpu. Speedfan shows 1 core and temp 3 where ever the hell its getting that reading says -128c I know I have a rather ambitious cooling solution but even I don't think it works that well. If anyone has a cell phone I can send the pics through that but other then that I gotta wait until I can put up pictures tomorrow.

Full specs -->
Corsair 650 Watt PSU
2 Gigs DDR2 800
Super writemaster dvd burner
WD2500 Sata (250gb)
Phenom 9600 BE 2.3ghz
1 - 5 of 5 Posts
Yay for mad cooling pics...
I'll give you a hint it was designed for cooling a bathroom.

It takes off -10c with just it for intake load (forgot to put on a exhaust fan).

Was kinda hopeing for a response sorta like. "Thats normal" "That shouldn't happen" "*** are you thinking" "I would rma that proc" "your missing some drivers probably"
Aye, every available place on my rig as a fan stuck in it including some holes I made with brute force.

who needs water cooling when you have a small storm.
Heres a thread with pictures of the computer if your interested SLeeZey
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.