Overclock.net banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I bought all the parts 2 days ago and I already assembled my computer I tried to look for beep codes and when i took off the ram and just started the computer, the beep code was 1 long 2 short.

The computer seem to have no display at all
I have no video card so i'm assuming i am using the onboard video card which is the intel graphic 2500
The computer turns no no problem. the fans are running including the cpu fan

" i am a first time builder"
" ive been looking for solutions for the past 2 days and i stuck"

PLEASE HELP AND I APPRECIATE IT

My Specs are :

Hardrive = 1 x Seagate Barracuda ST2000DM001 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive

Case and Powersupply=1 x Rosewill R519-BK Black ATX Mid Tower Computer Case w/ 500W Power Supply

Ram= 1 x G.SKILL Value 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-1600C11D-16GNT

Motherboard= 1 x ASUS P8Z77-V LK LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS

Processor= 1 x Intel Core i5-3570 Ivy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 77W Quad-Core Desktop Processor intel graph 2500
 

·
Registered
Joined
·
656 Posts
I don't know anything about that mobo, but is there such a thing as turning on HD2500 graphics in the BIOS? Monitor cable connected to the correct port?
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
how do i turn on the bios? i cant even see anything on the screen. the vga is blue and i connected that in the right spot.
 

·
Registered
Joined
·
301 Posts
1 long 2 short = no RAM. push back the snap brackets and take out the RAM. Leave brackets open and press in RAM until brackets snap closed. may take a bit of force. If problem continues remove one stick and try again. Then try the other. Report back with results.
 

·
Registered
Joined
·
656 Posts
Quote:
Originally Posted by aandyxp View Post

how do i turn on the bios? i cant even see anything on the screen. the vga is blue and i connected that in the right spot.
Duhhhh, don't know why I said to check in BIOS; all I know is that 18 yr old Glenlivet Scotch is great!
 

·
Registered
Joined
·
301 Posts
Quote:
Originally Posted by OS-Wiz View Post

Duhhhh, don't know why I said to check in BIOS; all I know is that 18 yr old Glenlivet Scotch is great!
Hahaha! I think OP is all set due to not reporting back. I remember the feeling of first build and fliping the switch and.... nothing. Wait, there is an 'on' switch on the PSU? Go figure!
 

·
Registered
Joined
·
4,920 Posts
Come back and let us know what it was, doesn't matter if it was simple, we have all been there!
thumb.gif


Congrats on your 1st build it looks good.- just need a decent video card and there are plenty of us on here to give you a recommendation whether it be amd or nvidia
biggrin.gif
 
1 - 7 of 7 Posts
Top