[quaddragon]

Hi Gang, just got my NZXT Vulcan, however the power LED has a 4 pin Molex using 2 pins and a 2 pin female pigtailed off of the Molex connector? How does this hook up? Do they both have to be hooked up to work?

 

[quaddragon]

Still havent found this answer yet! beginning to wonder if the LEDs in the case are dead

 

[Jonowxeno]

Should be able to just hook up the male 2-pin molex to PSU. The female coming off is if you wanted to hook more stuff up. Did the LED not turn on?

 

[quaddragon]

Quote:

Originally Posted by Jonowxeno;14191042
Should be able to just hook up the male 2-pin molex to PSU. The female coming off is if you wanted to hook more stuff up. Did the LED not turn on?

Nope

I got another front panel coming from NZXT because the first one had a piece snapped on the bottom, maybe it will have new LEDs in it.

 

[ViSioNx]

it should have leds. i have a front panel comming for my case just because of my power led.

make sure you have that plugged into a straight molex and not a chain of other plugs because i had problems with mine but turned out my fan controller adapter used the opposite 2 wires then the lights lol.