Overclock.net banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello this is my first post here so I'll get to the point

My CPU is an AMD Athlon XP 3000+
Before I tried overclocking my FSB was 334 Mhz and my
Memory Bus was 334 Mhz
Also my multiplier was 13 and the AGP was 100Mhz
which made my CPU speed 2175 Mhz

When i overclocked using Nvidia's SystemUtility I went too high
at one time. After the computer reset, my FSB was down to 200 Mhz
and my CPU was 1301 Mhz. However doing 13 X 200 made it 2600 Mhz

Did something happen to my processor or am I doing something wrong?
Thanks, Starbond7
 

·
Registered
Joined
·
276 Posts
1)Welcome!!
2) Try to lock agp/pci bus(66/33)

100MHz for agp is a way tooo high
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
I can't anyway, the AGP is locked

And 100Mhz was default on my AGP card. I can't figure out why its so high.
 

·
Registered
Joined
·
276 Posts
Please post your system specs(cpu/mobo/ram/vcard/psu etc)
Maybe then something will clear up
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #6 ·
Alright,

MoBo: FIC Au31
Processor : AMD Athlon XP 3000+
nforce 2 Chipset
512(x1) DDR SDRAM
Nvidia Geforce4 MX 128MB

Hope that helps!
Go here for any other information(including BIOS)
FIC AU31
 
1 - 6 of 6 Posts
Top