Overclock.net banner

1 - 12 of 12 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Hi! My name is DJ Madrid known as "KRYPTEK PC MODZ", a noob case modder from the Philippines.

This project is inspired by ROG, and I named this project "Rouge" because of how red it is.

Here are the components:


Processor: Intel i5 4670K
Motherboard: ASUS Maximus Formula VI
RAM module: Corsair Dominator Platinum 2x4GB 1600mhz
Graphics Card: ASUS GTX 770 DCUII 2GB
SSD: Samsung 840 PRO 120GB
HDD: Seagate Barracuda 1TB 7200rpm
PSU: Corsair HX650
Case: Corsair 600T Graphite
Sleeves: PinoyRIGZ/RENsleeve

Water Cooling

CPU Block: EK Supremacy
GPU Block: EK-VGA Supreme HF Bridge Edition - Acetal+EN (Nickel)
Pump: EK DCP 4.0
Reservoir: EK Multioption RES X2 - 150 Advanced
Radiator: Black Ice SR1 360mm
Fans: 3x Corsair AF120, 3x Corsair SP120
Fittings: Acrylic Compression Fitting 14mm OD, Bitspower 45deg & 90deg adapter
Tube: Acrylic Tube 14mm OD
 

·
Registered
Joined
·
12 Posts
Discussion Starter #2
First things first, this is a Corsair 600T case from my past build, I repainted it into Anzhal Red.


Cutting the rear panel using a jigsaw.


 

·
Registered
Joined
·
12 Posts
Discussion Starter #3
Now, dismantling the gpu
wink.gif





Installed the EK Supreme HF Bridge Edition


At this time, I used Signal Red paint which is a little bit darker to Anzhal Red.


And now.. I put them together like the Hybrid Poseidon gpu (air+water)
wink.gif

 

·
Registered
Joined
·
12 Posts
Discussion Starter #4
The Formula VI, this mobo was my first price of my past build case modding contest. And that was last year I won here in our country.






The DomPlats, installed..


SSD.....
 

·
Registered
Joined
·
12 Posts
Discussion Starter #5
This time I'm gonna make a thread using G1/4 hand tap.


I made this water channel for my custom loop and I think this is the first time to apply a water channel with Corsair 600T case(correct me if i'm wrong). This was also my first try to make a custom channel
biggrin.gif


Leak testing.. And looks fine!
 

·
Registered
Joined
·
12 Posts
Discussion Starter #6
Test fit
smile.gif







I mounted this HDD at the back of my mobo


Painted with red primer. (i know it is not color red, but it's labeled with red on spray can)


Now, finish coating with flat black and adding some detail
 

·
Registered
Joined
·
12 Posts
Discussion Starter #7
These are the 14mm OD fittings and the water channel






Final shots will upload later
biggrin.gif
 

·
Registered
Joined
·
12 Posts
Discussion Starter #8
Here we go!
biggrin.gif


















To be continued....
biggrin.gif
 

·
Registered
Joined
·
12 Posts
Discussion Starter #9
Cont.....

























Done....!! Thanks to God, friends, and family
biggrin.gif
 

·
Registered
Joined
·
12 Posts
Discussion Starter #11
Quote:
Originally Posted by DarkWr8h View Post

I love the color combo on the build.
thumb.gif
Thanks man! I appreciate it
thumb.gif
 

·
still learning
Joined
·
25 Posts
Beautiful rig,nicely done,outstanding colour sheme,keep it up!
 
1 - 12 of 12 Posts
Top