[YG Casemod]

Step 2 update.

Painting of the rear closing panel.

In these photos the various phases of the work.

In detail we will be looking the weathering oil effect on the screw holes.

The central logo will of course be backlit.

Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD​ ZOTAC​ ASRock​ Plextor​

 

[YG Casemod]

Step 2 update.[​IMG]

Painting the supporting pistons of the case.

In the photos all the processing phase.

In the last photo the rubber support spacers under the 2 custom support bases (feet) of the case.

Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD​ ZOTAC​ ASRock​ Plextor​

 

[YG Casemod]

Step 2 update.

Machine gun chassis and ammo box painting.

In the photos all the processing phase.

In detail we can see the weathering.

Also these parts will have backlighting and obviously the photos also refer to the mirror parts.

In the assembly phase we will see other particular details.

Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD​ ZOTAC​ ASRock​ Plextor​

 

[YG Casemod]

Step 2 update.

Final assembly of the monstrous Thermaltake Pacific CL 480 radiator in push / pull configuration with 120 mm Thermaltake Riing Trio fans, with the relative front side conveyors and the rear dynamic conveyor.

In the photos we can see the details such as the cable management of the fans and the fittings in the lower part of the radiator to empty the system when maintenance is needed.

Stay tuned.

Worklogs on
:
https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD​ ZOTAC​ ASRock​ Plextor

 

[YG Casemod]

Step 2 update.

Painting and assembly of the 2 Vulkan T2 heavy machine guns.

Painting and final assembly of the central body cover at the base of the case.

In the photos all the processing steps.
In detail, the very complex painting of all machine gun parts which was certainly not a walk and in particular the chrome rods with gunpowder effect and heat wear.

Stay tuned.
Worklogs on:
https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html
Thermaltake Technology Inc​ AMD ZOTAC​ ASRock​ Plextor

 

[YG Casemod]

Step 2 update.

In these photos we will see the final assembly of the machine guns.

In detail one of the 2 open machine guns where you can see the wiring of the ARGB LEDs in the expansion chamber (simulation).

In the machine body (simulation) an aluminum u-shaped section was positioned as a led port for backlighting.

Stay tuned.

Worklogs on:
https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD ZOTAC ASRock Plextor

 

[YG Casemod]

Step 2 update.

Caliber 50 bullets tapes (simulation)
.
In these photos we will see the finished ammunition tape mounted on the machine guns along with the whole process of painting of the bullets and the hand finishing with metallic pigment of the tapes.
Very complicated job that took a very long time
.
Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD ZOTAC ASRock Plextor

 

[YG Casemod]

Step 2 update.

PSU cover and left and right side deflectors.

In these photos we will see the definitive assembly of the cover for the psu with upper plate in polished plexy to display the illumination of the upper logo of the Thermaltake PF1 ARGB.

Obviously the cover will be backlit in the upper front part and also where there is the main logo, the skull with the sickle.

We will also see the 4 right and left deflectors finished with airbrushing, engravings and weathering.

Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php…

https://www.nexthardware.com/…/91741-project-stealth-advanc…

https://forums.bit-tech.net/index.php…

https://www.overclock.net/…/1733164-project-stealth-advance…

Thermaltake Technology Inc​ AMD ZOTAC ASRock Plextor

 

[YG Casemod]

Step 2 update.

Work is progressing and the conclusion is approaching.

In these photos we will see the complete assembly of the ASRock X570 Steel Legend motherboard with the Ryzen 5 3400 G, the Thermaltake W4 Plus water block, the WaterRams, the NVME PCI-E Plextor M9PE RGB SSD and the tubing.
We will also see custom sleeving with a few clicks of the editing procedure (the cables of the video card we will see in the next post).
In particular, the Thermaltake Pacific TF1 liquid flow and temperature sensor.

Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD ZOTAC ASRock Plextor

 

[YG Casemod]

Step 2 last update.

Last update regarding step 2.

Soon another 2 videos of the second step.

We are almost at the end of the work.

In these photos we will see the beautiful Zotac RTX 2080 AMP with the custom RGB backplate customized in theme with the mod.

Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc AMD ZOTAC ASRock Plextor

 

[YG Casemod]

Welcome back guys.

Movie time.

Video worklog step 2 part 1.

As promised a few days ago after the 2 videos of the step 1, here is also the first of the 2 of step 2, where we will see all phases of construction and painting of the custom parts of the mod.

The second is also very short.

Make yourself comfortable and have a good vision.

Stay tuned
.
Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD ZOTAC ASRock​ Plextor

 

[repo_man]

Your attention to detail, in regards to the paint especially, is amazing! What an incredible build.

 

[YG Casemod]

Your attention to detail, in regards to the paint especially, is amazing! What an incredible build.

THX man.

 

[YG Casemod]

Video worklog step 2 part 2.

Here is also the second video of step 2.
The mod is officially over and I refer you to the photos and the final video that will be released within December 20th last day and deadlines for the modders in competition to finish the works and all the posts for the contest as per regulation.

The actual deadline of the contest is set for December 23rd, while the voting will be officially launched on December 21st with a video presentation by Thermaltake Technology Inc.

Make yourself comfortable and have a good vision.

Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc​ AMD ZOTAC ASRock Plextor

 

[YG Casemod]

Welcome back guys.

End of works.

And here we are at the end of the works.

Here is the final video in 4 K , the complete photobook in Hi Res and the technical datasheet of this extreme mod.

What to say, a very demanding adventure given the great importance of this competition and the very high level of the contenders.

Even from a strictly technical / practical point of view as regards the realization of this extremely complicated and difficult mod in all its many details, it has been very very demanding.

Now the final verdict of the jury is expected.

A very special thank to Thermaltake Technology Inc. and to all the sponsors of this great event for having supported me and given this great opportunity.

Special thanks to Francesco Morgantini (Kernan) for the realization of the extraordinary final video and for the equally extraordinary photos that he performed.

Below the link to his Youtube channel:
https://www.youtube.com/channel/UC4NxRIlCBRI-jDPwpyyZJaQ

Make yourself comfortable and have a good vision.

Stay tuned.

Worklogs on:

https://community.thermaltake.com/index.php?/topic/89023-italy-yuri-gabrielli/

https://www.nexthardware.com/forum/...ake-casemod-invitational-season-2-2019-a.html

https://forums.bit-tech.net/index.p...ke-casemod-invitational-season-2-2019.366554/

https://www.overclock.net/forum/180...ake-casemod-invitational-season-2-2019-a.html

Thermaltake Technology Inc AMD ZOTAC ASRock Plextor

Thanks to all for following me. https://www.facebook.com/Y.GabrielliCasemod/

 

[lightsout]

Man that is really stunning. So much detail, I am really impressed.

 

[dranas]

Wow, that is really nice. Your work has made me appreciate the color yellow.

 

[Barefooter]

It looks fantastic! Great work :thumb:

 

[YG Casemod]

Thermaltake CaseMOD Invitational Season 2.

The final vote starts today.

Voting duration from 24/12/2018 to 7/1/2019

If you like and you like my mod, rate it.

To vote you must log in.

I leave you the links with the procedure:

Log in procedure:

https://casemod.thermaltake.com/201...yp3ztcs5sR6TXDOR6P4L9v-YCOfaBbE0JjVSu_1CL1Qwg

To vote:

https://community.thermaltake.com/i...lUi2dVemuJN8B9pQUaqWmGadnUysPAV1nuuTXOSoR-VyE