Overclock.net banner
1 - 5 of 5 Posts

·
Registered
R5 3600 / X570 Aorus Elite WIFI / EVGA RTX 3080 Ti FTW3
Joined
·
1,113 Posts
Quote:
Originally Posted by kaz03;13007219
I'm quite new to the hardware scene and I want to know of my everest 85 plus 700w psu can run both a gtx 460 and a gts 450 (for physx) or would I need to upgrade to use both? Thanks for the help~
It should work fine for those two cards. You should fill in the system specs in your signature so we can see what kind of CPU you have, too.
 

·
Registered
Joined
·
897 Posts
Definitely, you'll have enough juice to even stick in a 8800GTX lol (hopefully that's if your CPU doesn't take too much power)

Everyone gets a bit paranormal when it comes to PSU, the 590 takes 500+ watts alone on full load, 6990 takes about 470-ish watts alone? idk, correct me if I'm wrong.

Your 460 should be pulling around 200 watts or more.. depending on overclock and your 450 would take less than 150 watts if not overclocked (obviously not lol, it's a Physx card)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top