Overclock.net banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
5,417 Posts
Discussion Starter · #1 ·
I am having problems with my Q6600 Overclock in my sig computer,

The computer works fine at stock clocks,

When overclocked between 2.4 and 3.0 it freezes on start up (fine is sli option is off)

When overclocked above 3.0 the pc runs and sometimes freezes on start up (fine is sli option is off)

and above 3.4 my L4D crashes. (happens if sli option is on or off)

at 3.6 I played crysis and all was fine, then i used the windows score tool and it blue screened (happens if sli option is on or off)

Does anyone have any solutions for this, could any of my hardware be faulty
 

·
Guess I'm Back
Joined
·
3,667 Posts
When overclocking your CPU and running SLI, you will need to up your NB voltage.
 

·
Premium Member
Joined
·
5,417 Posts
Discussion Starter · #7 ·
ive set the cpu to 1.3 volts in the bois, theres another one, cpu FSB i left that,

but cpu-z says the voltage is 1.272 V

biis says 1.6
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top