OCCT is very nice. I usually use OCCT along with Prime95 to check for stability. OCCT for a 2-3 hours to check the settings - and if everything seems fine then, I let Prime do it's work for 8-12 hours to check the long therm stability.
1 - 8 of 8 Posts
Quote:
what settings should i use like blend or the other ones?
Originally Posted by ChristianEx OCCT is very nice. I usually use OCCT along with Prime95 to check for stability. OCCT for a 2-3 hours to check the settings - and if everything seems fine then, I let Prime do it's work for 8-12 hours to check the long therm stability. |
Quote:
thank you i just installed prime95 so i will run some tests soon
Originally Posted by boydyboyd OCCT's linpack test is probably one of the most strenuous tests your likely to come across(except intel's burn test, which is exactly the same as the linpack). But sometimes running prime95 on blend will find any faults in your RAM. Running a mix of stress tests is never a bad idea. |
2
Quote:
blend tests your RAM (alot...) and small FTTs gives maximum heat output, but barely anything compared to OCCT's linpack test
![]()
Originally Posted by skeptic what settings should i use like blend or the other ones? |
2
Quote:
lol thx again man,
Originally Posted by boydyboyd blend tests your RAM (alot...) and small FTTs gives maximum heat output, but barely anything compared to OCCT's linpack test
|
1 - 8 of 8 Posts
