[x2s3w4]

So I got a Q9550 from Shifty22123 and I put it in and fired up 2 rounds of Orthos to check temps. Here they are. Too high right? Especially for this voltage.
Edit: Ambient of 68F.

 

[Syrillian]

As you stated, perhaps a re-seat (occasionally several) would be in order.

 

[x2s3w4]

I always get the best installs with my Tuniq Tower by taking out the mobo, but having just got this I was trying to do a quick install and I probably jostled it around too much installing it cause my case is very tight. So much for saving time.:swearing:

 

[valtopps]

if thats under load there fine. oc it lets go.

 

[error10]

Under load at stock with a Tuniq Tower? Is there a fan on that tower or are you running it passive? Something's definitely wrong with your cooling.

 

[x2s3w4]

Quote:

Originally Posted by error10 Under load at stock with a Tuniq Tower? Is there a fan on that tower or are you running it passive? Something's definitely wrong with your cooling.

Nah, fan is on full. I figured I buggered up the TT install by not taking the mobo out of the case. I have it apart now and will post back when i get it put back together. I think I have the smallest full tower case on the market, cause there's no room in there to get your fingers around the knobs to tighten down the TT. I'm sure I smeared the TIM when installing it.

 

[jjrowley]

Yeah that is way too hot. I have mine barely hitting those temps at 3825MHz, 8.5 Multiplier, 450MHz Bus speed and 1800 Rated FSB.

 

[x2s3w4]

Well, I got a little better. I think my case is holding me back because there isn't good airflow through it. On the other hand this chip is pretty good. With no tweaking and just a little voltage I was able to get to 4.0. Still need to get it cooler.
First ss is about 5°c cooler than before the reseat.

 

[error10]

Heh, I was wondering when you were going to OC it!

Those temps look fine. Congrats on getting 4GHz!