Overclock.net banner
1 - 1 of 1 Posts

9,460 Posts
This seems to be an interesting paragraph when it comes to your mobo :


Heading north from our previous location we find the area of the board that is populated by memory slots. In particular, this board has six 240-pin DDR3 slots rated to accept 1GB, 2GB, or 4GB modules rated anywhere from 1066MHz up to 2000MHz. The system is capable of triple channel operation, which requires 3, 4 or 6 modules to be installed. If you are running with a traditional triple channel setup of three modules, you need to use the blue slots, and save the black slots for when/if you ever add more modules.

According to that paragraph, you are advised to use the blue slots when you are running a traditional tri-channel setup. I would assume that in your case, running 3 black and 1 blue would work or running 3 blue and 1 black. I could be wrong, you can alaways check and get back to us.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.