Overclock.net banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,364 Posts
Discussion Starter · #1 ·
I'm running the RAM in my sig. I just want to make sure it is running optimally. Right now, since my MB only supports DDRII up to 666, my RAM is running at 586MHz(my CPU is overclocked so if I set the RAM to 666 it won't boot because the RAM OCs with the CPU making it's frequency higher then the supported 666) and the timings are 4*4*4*10 at a 3:4 divider. Just wondering if this was decent for this RAM. Could I make my timings even tigher? If so, what timings should I try.
Thanks
Gibby
 

·
Premium Member
Joined
·
29,533 Posts
Try something like 4-4-3-7 or lower of the 2 last. The 2 last ones are what influences stability least.
 
  • Rep+
Reactions: GibbyGano
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top