Overclock.net banner
1 - 2 of 2 Posts

· Registered
Joined
·
669 Posts
I believe my raid0 setup is using the same or simliar set up on your p6t....mine works perfect and gave the expected results.....I hook up my old ide drive from time to time to back everything up and it is recognized fine by itself
 

· Registered
Joined
·
669 Posts
Quote:

Originally Posted by MNiceGuy View Post
Alright guys thanks again for the words of wisdom. The Spinpoint is out and two brand-new WD 640 AAKS are in! So yes I now have 1TB+ for an OS drive but the 640's were a far better deal than the 320's when I picked them up.

The Vista installer picked up the array on the ICH10R without the driver disc and the secondary drives are doing just fine on their own as non-RAID discs. I'm getting the OS loaded up and then I'll post up a comparison.
cool stuff, get some benchies on the speed of your array!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top