Orient it so that you have the freshest air hitting the rad...bfd that some warm air is going into the case, you got at least one exhaust fan for the case right? Besides, the difference of air in to air out concerning your radiator is minimal.
Radiator + Fans orientation
Okay, I will not be using a shroud so I already know that I will have my fans in push, but my question is should I have...
-The fans pulling air from outside the case, pushing through the radiator, and exhausting heated air into the case?
or
-The fans pulling pre-heated air from inside the case, pushing through the radiator, and exhausting the rad-heated air out of the case
For reference I am using a haf 932 with a triple rad on the top, I am keeping both of the other stock intake 240 mm fans, as well as the 140 mm rear exhaust, water cooled components are going to be both GPUs and CPU (sig rig)
Sorry for the long post...
![]()
-The fans pulling air from outside the case, pushing through the radiator, and exhausting heated air into the case?
or
-The fans pulling pre-heated air from inside the case, pushing through the radiator, and exhausting the rad-heated air out of the case
For reference I am using a haf 932 with a triple rad on the top, I am keeping both of the other stock intake 240 mm fans, as well as the 140 mm rear exhaust, water cooled components are going to be both GPUs and CPU (sig rig)
Sorry for the long post...
1 - 3 of 3 Posts
Seems fine to me the way you have it, Have ur rad fans pushing out through the rad, As for the 240mm Side fan you can always change them for more case air with 4x 120mm Fans like i did
![]()
1 - 3 of 3 Posts
