Overclock.net banner

1 - 5 of 5 Posts

·
Registered
Joined
·
245 Posts
Discussion Starter · #1 ·
I have 4 Gb of this RAM but cannot get them to run at 1600 mhz. the motherboard has them set originally at 1333 with 9-9-9-20 as the timings and at 1.5 volts. I went into the BIOS and changed the speed to 1600, the timings to 8-8-8-24 and the voltage to 1.65, but I get random BSODs. I have tested the ram in memtest, and everything was fine with it. does anyone know of something else i could try?
 

·
Registered
Joined
·
2,770 Posts
Read the third and fourth reviews on the Feedback page. They had the same issue as you. Contact OCZ tech support and see what they say.
 

·
Premium Member
Joined
·
20,621 Posts
Is your 635 a C2?
C2's are known to have trouble at 1600Mhz.
You can lower timings to 1333 CAS7 to compensate.
 

·
Registered
Joined
·
4,234 Posts
Quote:


Originally Posted by xd_1771
View Post

Is your 635 a C2?
C2's are known to have trouble at 1600Mhz.
You can lower timings to 1333 CAS7 to compensate.

no!
all it needs is some nice warm voltage on the imc and maybe a tad on the ram
 

·
Registered
Joined
·
2,770 Posts
My C2 chip has no problem doing 1600. Currently my ram runs at 1500 with a small bump of the CPU-NB voltage to 1.22. DRAM voltage is 1.7.
 
1 - 5 of 5 Posts
Top