Overclock.net banner

RAM overclock unstable - please help me

917 Views 7 Replies 4 Participants Last post by  HOMECINEMA-PC
Hello im a newbee in pc building and overclockings. Would anyone be able to help to provide XPG spectrix's overclock settings pls

I recently built a pc and originally installed a Klevv Hynix DDR4 Bolt X 3200MHz ram which I was able to overclock to 3200mhz using my Mobo's xmp settings. However, I decided to upgrade my RAM to an XPG spectrix d50 and when i tried to overclock it to 3200mhz, my pc is unstable.

Parts
Mobo - Asrock B660m pro rs - according to manufacturer label it is capable of Supporting up to DDR4 4800MHz (OC)
CPU - Intel i5-12400f ( according to intel website CPU can support DDR4 3200MHz )
XPG Spectrix D50

Has anyone have the same specs as i have and was able to overclock RAM to 3200mhz? please help provide settings please as i am really lost at this point

Thank you
1 - 8 of 8 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
hi Ichirou

this is the product page - https://www.xpg.com/us/xpg/653

wanna share this if it helps;
for the klevv ram i noticed the sequence are 3200mhz 16 - 18 - 18 - 38 @1.35V which is different from XPG's XMP for 3200mhz (i just cant remember the details for now)
i tried copying the stable frequency from klevv to xpg but it is still unstable
 

· Registered
Joined
·
5,829 Posts
hi Ichirou

this is the product page - https://www.xpg.com/us/xpg/653

wanna share this if it helps;
for the klevv ram i noticed the sequence are 3200mhz 16 - 18 - 18 - 38 @1.35V which is different from XPG's XMP for 3200mhz (i just cant remember the details for now)
i tried copying the stable frequency from klevv to xpg but it is still unstable
So you're trying to use both kits of RAM together at 3,200 MHz 16-18-18-38?
Have you tried increasing the DRAM voltage or lowering the frequency?
 

· Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
Yes i want to use both at 3200 MHz
the 16-18-18-38 was the settings for Klevv at 3200 MHz 1.35V (stable)

However, XPG if i remember right was 18 - 20 - 20 - 42 @ 1.35V

i have tried manually keying-in Klevvs frequency on XPG but was still unstable. I havent tried increasing voltage as but were running at 1.35V so i was thinking that there is no need to increase it since essentially im lowering down XPG's frequency but copying Klevvs on it
 

· Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
Yes i want to use both at 3200 MHz
the 16-18-18-38 was the settings for Klevv at 3200 MHz 1.35V (stable)

However, XPG if i remember right was 18 - 20 - 20 - 42 @ 1.35V

i have tried manually keying-in Klevvs frequency on XPG but was still unstable. I havent tried increasing voltage as but were running at 1.35V so i was thinking that there is no need to increase it since essentially im lowering down XPG's frequency but copying Klevvs on it
sorry i mean both was running at 1.35V
 

· Registered
Joined
·
358 Posts
rtl SETUP?
 

· New to Overborked.net
Joined
·
10,224 Posts
1 - 8 of 8 Posts
Top