Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
876 Posts
Discussion Starter #1
I'm getting some kingston hyperX ram very soon. I hear they don't OC well with stock timings, lets say the timings were 2.5-3-3-7-1 [CAS tRP tRCD tRAS](KHX3200K2/2G ,2GB 400MHz DDR Non-ECC CL2.5), what should I set the timings on?
 

·
Premium Member
Joined
·
3,449 Posts
Those are the timings you would set them to at 200fsb.
By loosening the timings, you can raise your fsb but mighty need a bump in vdimm voltage.
 

·
Registered
Joined
·
876 Posts
Discussion Starter #3
i guess im going to have to run them on a 166 divider since they don't OC much with stock timings (230 mhz, 225 to be safe) . Vdimm of 2.5 enough?
 
1 - 3 of 3 Posts
Top