Overclock.net banner

1 - 20 of 122 Posts

·
Registered
Joined
·
439 Posts
Discussion Starter #1
hey i just bought some parts on newegg<br />
<br />
at some great suggestions on pple on this site<br />
<br />
chozart <br />
<br />
thumper<br />
<br />
snerp to name a few<br />
<br />
( and those i don't/forget to name im rly tired right now and u <br />
can yell it out on me later)<br />
<br />
here is my build as of tday<br />
<br />
intel conroe core 2 duo e6600<br />
ASUS P5W DH DELUXE/WIFI-AP<br />
2 gigs g.skill pc6400 ddr800 ram dual channel kit<br />
HDD1 2X 150gb 10,000 rpm sata150 western digital raptors<br />
HDD2 2X 250gb Seagate Barracuda 7200.10 ST3320620AS perp recording<br />
PC Power & Cooling Silencer 750W EPS12V<br />
<br />
been looking at antec and thermaltake for the cases<br />
<br />
even that asus anniversary case ( the seashell i think)<br />
<br />
and if i was gonna boast uber enthusiast a XOXiDE case or a UFO type crate case...<br />
<br />
but im going watercool so i can worry about the case second<br />
<br />
external radiator like zalman reservator i kinda dug... just cuz its fanless and a big heatsink outside the puter, all in one<br />
<br />
danger den i heard good things<br />
<br />
but if u pple have suggestions im welcome to em as i am going to wait for all this to ship so im going to flag my parts on newegg and pricewatch and all that soon
 

·
Retired
Joined
·
2,425 Posts
If your planning on buying a kit I would suggest the swiftech series kits. They are awesome. I own the swiftech premium h20-120 and am very happy with its results. The Apex Ultra could only be better, I did a mini-review on it, ill go find it real quick.<br />
<br />
Here it is: <a href="http://www.overclock.net/water-cooling/119171-swiftech-h20-120-results.html" target="_blank">http://www.overclock.net/water-cooli...0-results.html</a>
 

·
SNERP!!!
Joined
·
4,183 Posts
Here's the usual list for a well rounded custom setup:<br />
<br />
Danger Den D5 Pump<br />
Swiftech Apogee<br />
Danger Den MAZE 4 GPU + RAMsinks<br />
Bonneville Heater Core + Fans<br />
Res or T-line (I like T-lines)<br />
<br />
Read as many post as you can. Just get a general idea of what goes where, why you want a certin part and all that fun stuff. Most of it is just research and we are more than happy to answer any specific questions you may have <img src="/images/smilies/thumb.gif" border="0" alt="" title="Thumb" class="inlineimg" />
 

·
Premium Member
Joined
·
7,891 Posts
yeah snerps about right except i wouldnt go with a bonny unless your trying to save money which doesnt look like your doing at the moment so i would just get a good 120x2 rad - itll be much easier to mount and you wont be having to jeri rig it onto our case<br><br>
personally i like res's but thats me, and i would build my own setup instead of buying a kit its alot of fun actually and you learn alot<br><br>
this is what i would probably get<br>
cpu block<br><a href="http://www.crazypc.com/products/93031.html" target="_blank">http://www.crazypc.com/products/93031.html</a><br><br>
gpu (i would get the reguler profile one if you dont need the shorty<br><a href="http://www.crazypc.com/products/93655.html" target="_blank">http://www.crazypc.com/products/93655.html</a><br><br>
pump- these things last forever<br><a href="http://www.crazypc.com/products/9336.html" target="_blank">http://www.crazypc.com/products/9336.html</a><br><br>
rad<br><a href="http://www.dangerdenstore.com/product.php?productid=2&cat=85&page=1" target="_blank">http://www.dangerdenstore.com/produc...&cat=85&page=1</a><br><br>
res 9 these are cool and dont take up alot of space<br><a href="http://www.frozencpu.com/products/2226/ex-res-80/Swiftech_MCRES-MICRO_Small_Form_Factor_High-Flow_Reservoir_12_ID_and_38_ID.html?tl=g30c97s168" target="_blank">http://www.frozencpu.com/products/22...?tl=g30c97s168</a><br><br>
other stufff, go with 1/2"id tubing and fittings , allways stay with the same type of metal, use tygon-it is flexible and doesnt kink up on ya to bad<br>
as far as additives i like waterwetter found at your local auto zone<br><br>
this is what iwould prob get alot of people here will change some of the stuff here depending on your price range and performance wantted<br><br>
gl
 

·
Registered
Joined
·
91 Posts
here dude<br><br><a href="http://www.petrastechshop.com/pecodaloed.html" target="_blank">http://www.petrastechshop.com/pecodaloed.html</a>
 

·
Premium Member
Joined
·
22,477 Posts
Snerps list is hard to beat...If you want a different rad, just for the looks of it and one that still performs well this is a good one.....<a href="http://www.dangerdenstore.com/product.php?productid=2&cat=5&page=1" target="_blank">http://www.dangerdenstore.com/produc...2&cat=5&page=1</a><br />
Danger Den :: Radiators :: Black Ice XtremeII Radiator
 

·
Premium Member
Joined
·
7,891 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

Snerps list is hard to beat...If you want a different rad, just for the looks of it and one that still performs well this is a good one.....<a href="http://www.dangerdenstore.com/produc...2&cat=5&page=1" target="_blank">http://www.dangerdenstore.com/produc...2&cat=5&page=1</a><br />
Danger Den :: Radiators :: Black Ice XtremeII Radiator

</td>
</tr>
</table>
</div>yep and the best thing is these are usually easier to mount then the heater core but it jsut up to you how much modding you want to do
 

·
SNERP!!!
Joined
·
4,183 Posts
Heatercores work <u>very</u> well. You can buy them with barbs and shrouds so that isn't much of a hassle. All the black ice rads are great, but if you want a rad I would go with the 240 GT <a href="http://www.dangerdenstore.com/product.php?productid=221&cat=86&page=1" target="_blank">here</a>. It's the newest revision of the black ice series. Or, if you want to drop some cash, you could go for a Thermochill rad <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
Masterkleer Tubing is great tubing and it cost $.49/ft as compared to $3/ft. It's almost as flexible as tygon at 1/6 the price.
 

·
Registered
Joined
·
2,682 Posts
I would look into the Swiftech Storm Rev. 2 CPU waterblock...it's built like a friggin tank. I have one, I'm just waitin until the time is right to install my H2O...I haven't surely decided which I'm going to use though, DD Maze 4 GPU block, or the Swiftech MCW60 GPU Block....I have both though...I'm leaning toward Swiftech...=)
 

·
Premium Member
Joined
·
22,477 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

<div>
Originally Posted by <strong>Snerp</strong>

</div>
<div style="font-style:italic">Heatercores work <u>very</u> well. You can buy them with barbs and shrouds so that isn't much of a hassle. All the black ice rads are great, but if you want a rad I would go with the 240 GT <a href="http://www.dangerdenstore.com/product.php?productid=221&cat=86&page=1" target="_blank">here</a>. It's the newest revision of the black ice series. Or, if you want to drop some cash, you could go for a Thermochill rad <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
Masterkleer Tubing is great tubing and it cost $.49/ft as compared to $3/ft. It's almost as flexible as tygon at 1/6 the price.</div>

</td>
</tr>
</table>
</div> ...........Hey Snerp I love that Masterkleer....And I didn't know they had come out with the GT Extreme...I was just thinking about The GT Stealth...Even though you did link me just a couple weeks ago....Drat your right again...<img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" />.....<a href="http://www.hwlabs.com/gen2/gtx/gtx240.htm" target="_blank">:::: Hardware Labs - Gen Two ::::</a>
 

·
Registered
Joined
·
439 Posts
Discussion Starter #11
wow that lookd frrgn schweet
 

·
Registered
Joined
·
439 Posts
Discussion Starter #12
yeah i mean i "am" trying to save money. but if i can spend the extra 40 or 50 for a higher end gig i will<br><br>
im sure that later on i will be killing chevys for heatcores and making cases out of wood... but thats not where im at right now lol
 

·
Registered
Joined
·
439 Posts
Discussion Starter #13
ok well i was lookin at one of these<br><br>
RADIATOR<br><a href="http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=3944" target="_blank">http://www.performance-pcs.com/catal...oducts_id=3944</a><br><br>
this radiator seems appealing since im shooting for least noise on this particular rig ( my rig has 7 fans o_O sounds like a jet turbine when booting<br>
which is kinda cool but not when u wanna check ur email at 1am pissin off your rmmates)<br><br>
RESERVOIR<br><a href="http://www.frozencpu.com/products/2226/ex-res-80/Swiftech_MCRES-MICRO_Small_Form_Factor_High-Flow_Reservoir_12_ID_and_38_ID.html?tl=g30c97s168" target="_blank">http://www.frozencpu.com/products/22...?tl=g30c97s168</a><br>
this res seems cool but any res will do...<br><br>
do u think a res can be fitted ( jerry rigged)on a antec 900 that new case with a ceily fan?<br><br>
i just thought this was rather pimpin for a RES...<br><a href="http://www.crazypc.com/products/93323.html" target="_blank">http://www.crazypc.com/products/93323.html</a><br><br>
GPU BLOCKs<br><a href="http://www.crazypc.com/products/93655.html" target="_blank">http://www.crazypc.com/products/93655.html</a><br><a href="http://www.crazypc.com/products/9363B.html" target="_blank">http://www.crazypc.com/products/9363B.html</a><br><br>
CPU BLOCK (MAYBE)<br><a href="http://www.crazypc.com/products/93052U.html" target="_blank">http://www.crazypc.com/products/93052U.html</a><br><a href="http://www.frozencpu.com/products/2021/ex-blc-231/Danger_Den_TDX_775_Copper_Water_Block_Intel_775.html?tl=g30c85" target="_blank">http://www.frozencpu.com/products/20...html?tl=g30c85</a><br><br>
SOME RAMSINKS<br><a href="http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=294" target="_blank">http://www.performance-pcs.com/catal...ndex&cPath=294</a><br>
since i got a dual channel going,<br><br>
some toobings ( toobing) (tubing)<br><br><a href="http://www.dangerdenstore.com/product.php?productid=61&cat=33&page=1" target="_blank">http://www.dangerdenstore.com/produc...&cat=33&page=1</a><br><br><br><br>
other inquiries...<br><br>
1/2 tubing over 3/8?<br>
well i gotta get tubing and fans since i left those out ( i assume they dont come with the rad unless i add them and shrouds)<br><br>
anything else? i know i gotta get like clamps or fittings or whatever u call it<br><a href="http://www.frozencpu.com/products/2296/ex-tub-38/Koolance_Innovatek_G14_Thread_38_ID_x_12_OD_Compression_Fitting.html" target="_blank">http://www.frozencpu.com/products/22...n_Fitting.html</a><br>
( i rly gotta write clearer lists >_<)<br><br>
should i get bridge heatsinks or a bridge pipe ( N/S BRIDGE)<br><br>
btw i was originally lookin at this<br><a href="http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=20695" target="_blank">http://www.performance-pcs.com/catal...ducts_id=20695</a><br><br>
just cause the idea of fanless left me in o_O<br><br>
im ending up using the same amount XDDDD more or less<br><br>
bbs
 

·
SNERP!!!
Joined
·
4,183 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

<div>
Originally Posted by <strong>burntheskies</strong>

</div>
<div style="font-style:italic">ok well i was lookin at one of these<br />
<br />
RADIATOR<br />
<a href="http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=3944" target="_blank">http://www.performance-pcs.com/catal...oducts_id=3944</a><br />
<br />
this radiator seems appealing since im shooting for least noise on this particular rig ( my rig has 7 fans o_O sounds like a jet turbine when booting<br />
which is kinda cool but not when u wanna check ur email at 1am pissin off your rmmates)<br />
<br />
RESERVOIR<br />
<a href="http://www.frozencpu.com/products/2226/ex-res-80/Swiftech_MCRES-MICRO_Small_Form_Factor_High-Flow_Reservoir_12_ID_and_38_ID.html?tl=g30c97s168" target="_blank">http://www.frozencpu.com/products/22...?tl=g30c97s168</a><br />
this res seems cool but any res will do...<br />
<br />
do u think a res can be fitted ( jerry rigged)on a antec 900 that new case with a ceily fan?<br />
<br />
i just thought this was rather pimpin for a RES...<br />
<a href="http://www.crazypc.com/products/93323.html" target="_blank">http://www.crazypc.com/products/93323.html</a><br />
<br />
GPU BLOCKs<br />
<a href="http://www.crazypc.com/products/93655.html" target="_blank">http://www.crazypc.com/products/93655.html</a><br />
<a href="http://www.crazypc.com/products/9363B.html" target="_blank">http://www.crazypc.com/products/9363B.html</a><br />
<br />
CPU BLOCK (MAYBE)<br />
<a href="http://www.crazypc.com/products/93052U.html" target="_blank">http://www.crazypc.com/products/93052U.html</a><br />
<a href="http://www.frozencpu.com/products/2021/ex-blc-231/Danger_Den_TDX_775_Copper_Water_Block_Intel_775.html?tl=g30c85" target="_blank">http://www.frozencpu.com/products/20...html?tl=g30c85</a><br />
<br />
SOME RAMSINKS<br />
<a href="http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=294" target="_blank">http://www.performance-pcs.com/catal...ndex&cPath=294</a><br />
since i got a dual channel going,<br />
<br />
some toobings ( toobing) (tubing)<br />
<br />
<a href="http://www.dangerdenstore.com/product.php?productid=61&cat=33&page=1" target="_blank">http://www.dangerdenstore.com/produc...&cat=33&page=1</a><br />
<br />
<br />
<br />
other inquiries...<br />
<br />
1/2 tubing over 3/8? <br />
well i gotta get tubing and fans since i left those out ( i assume they dont come with the rad unless i add them and shrouds)<br />
<br />
anything else? i know i gotta get like clamps or fittings or whatever u call it<br />
<a href="http://www.frozencpu.com/products/2296/ex-tub-38/Koolance_Innovatek_G14_Thread_38_ID_x_12_OD_Compression_Fitting.html" target="_blank">http://www.frozencpu.com/products/22...n_Fitting.html</a><br />
( i rly gotta write clearer lists >_<)<br />
<br />
should i get bridge heatsinks or a bridge pipe ( N/S BRIDGE)<br />
<br />
btw i was originally lookin at this<br />
<a href="http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=20695" target="_blank">http://www.performance-pcs.com/catal...ducts_id=20695</a><br />
<br />
just cause the idea of fanless left me in o_O<br />
<br />
im ending up using the same amount XDDDD more or less<br />
<br />
bbs</div>

</td>
</tr>
</table>
</div>Ok...we need to get you reading up on all this stuff. Half that stuff won't even work together without major mods. Alright well...here goes the explanation...<br />
<br />
A triple rad is HUGE. Just know that before you get it. I had a triple inside my Stacker and it took up all the drive bays but two and the stacker is a monster.<br />
<br />
That Thermaltake res is kinda lame. The largest tubing you can use on it is 3/8"ID and you want 1/2"ID. There is a big difference between the two.<br />
<br />
If you do get the MAZE4 as your GPU block you should get the normal one, not the Low Profile. The MCW-60 is a great block too.<br />
<br />
The Apogee or Storm is the way to go for the CPU block. The TDX isn't half bad, but it isn't as good as the swiftech blocks.<br />
<br />
Stay away from RAM watercooling. It isn't needed, RAM doesn't get hot enough unless you are overvolting BH-5 and still that can be taken care of with a well placed fan.<br />
<br />
That tubing will do you fine, but MasterKleer at the cheaper price would be the way to go if you ask me. Yeah you need to buy fans, I love Panaflo fans.<br />
<br />
Those fittings are for something completely different.<br />
<br />
If you want to cool your NB get an air chipset cooler. Yet again, this is a part that doesn't get hot enough to watercool. Plus, if you did watercool it would add unnecessary restriction to your water loop, potentially taking away from your CPU & GPU.<br />
<br />
Don't buy a Zalman Reserator...
 

·
Premium Member
Joined
·
7,891 Posts
<a href="http://www.dangerdenstore.com/product.php?productid=172&cat=33&bestseller" target="_blank">http://www.dangerdenstore.com/produc...=33&bestseller</a><br><br>
ok this is the tubing you want, trust me pay the extra money for it its well worth it,<br><br>
i agree with snerp on the cpu and gpu block choices but if you do get a tdx (which is what i have) get the one with the metal top to make it easier to upgrade to a new socket<br><br>
the rad get the black ice extreme dual 120mm, it will easily cool a gpu and cpu even if you run your fans at a decent level to keep the noise down<br><br>
snerp covered the rest of the stuff allthough i like to run a northbridge one it doesnt take away enough if running 1/2" id tubing to have any noticable effect on other temps but it is nice keeping your chipset around 32 all the time but a good air cooler will suffice nicely and make the entire rig easier to deal with<br><br>
and i would stick with that reservoir you posted first it is small and easily mounted anywhere witha a little space
 

·
Registered
Joined
·
439 Posts
Discussion Starter #16
yeah alot of those parts i just dug for aesthetics and no so much on operating capacity, specs, etc...<br />
<br />
i was lookin at this thing posted by sticky on watercooling as a base reference<br />
<br />
will update soon
 

·
Registered
Joined
·
439 Posts
Discussion Starter #17
Hey guys... you guys... are awesome.<br />
<br />
here are some updated specs of the suggested watercool rig for my case-<br />
·Pump (Can be AC [Wall] or DC [PSU])<br />
<a href="http://www.crazypc.com/products/9336.html" target="_blank">http://www.crazypc.com/products/9336.html</a><br />
<br />
·A T-fitting if using a T-line, or a 3.5 or 5.25 bay reservoir<br />
( im gonnna flag against A T-line as im still a noob. Not that i don't have faith in my abilities but im better off anti-stupidity dampening this as much as possible. and rather watch the system at work...and bleed... and all that stuff like a science project .oO )<br />
<a href="http://www.frozencpu.com/products/2226/ex-res-80/Swiftech_MCRES-MICRO_Small_Form_Factor_High-Flow_Reservoir_12_ID_and_38_ID.html?tl=g30c97s168" target="_blank">http://www.frozencpu.com/products/22...?tl=g30c97s168</a><br />
<br />
·GPU waterblock <br />
<a href="http://www.crazypc.com/products/9363B.html" target="_blank">http://www.crazypc.com/products/9363B.html</a><br />
<br />
·Chipset waterblock <br />
<br />
As an alternative/s for chipset waterblock<br />
<a href="http://www.coolerguys.com/840556016366.html" target="_blank">http://www.coolerguys.com/840556016366.html</a><br />
<a href="http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=43&products_id=3302" target="_blank">http://www.performance-pcs.com/catal...oducts_id=3302</a><br />
or i can just do with some thermaltake pennies ( copper ramsink coolers)<br />
^___^<br />
<br />
·2 120mm fans if using a heater core, or a dual 120mm radiator<br />
<a href="http://www.sidewindercomputers.com/bliceproiidu1.html" target="_blank">http://www.sidewindercomputers.com/bliceproiidu1.html</a><br />
(wow i must be screwy this week to leave that out<br />
<br />
<br />
now before i continue this was the quiet before the storm...<br />
<a href="http://www.jab-tech.com/Swiftech-Storm-Universal-Waterblock-Rev-2-pr-3022.html" target="_blank">http://www.jab-tech.com/Swiftech-Sto...2-pr-3022.html</a><br />
<br />
·CPU waterblock<br />
<a href="http://www.frozencpu.com/products/2021/ex-blc-231/Danger_Den_TDX_775_Copper_Water_Block_Intel_775.html?tl=g30c85" target="_blank">http://www.frozencpu.com/products/20...html?tl=g30c85</a><br />
<a href="http://www.crazypc.com/products/93031.html" target="_blank">http://www.crazypc.com/products/93031.html</a><br />
<br />
well the pump that i choose bangs out up to 50 psi so im assuming i can run a sli setup with rad, res, cpu ( not necessarily in that order )<br />
<br />
<br />
<br />
<br />
·Tubing (At least 13 feet)<br />
<a href="http://www.dangerdenstore.com/product.php?productid=172&cat=33&bestseller" target="_blank">http://www.dangerdenstore.com/produc...=33&bestseller</a><br />
any tubing really can be ideal as i have never seen it in action.<br />
im totally taking " word of mouth" into consideration though<br />
<br />
·Clamps (Worm-drive or Zip ties work well)<br />
<a href="http://www.dangerdenstore.com/product.php?productid=62&cat=33&page=1" target="_blank">http://www.dangerdenstore.com/produc...&cat=33&page=1</a><br />
<br />
also when i got lost i used this for reference to jutt out into getting different parts<br />
<a href="http://www.dangerdenstore.com/product.php?productid=7&cat=0&page=1" target="_blank">http://www.dangerdenstore.com/produc...7&cat=0&page=1</a><br />
<br />
·Cases (for the whole party)<br />
<a href="http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=20819" target="_blank">http://www.performance-pcs.com/catal...ducts_id=20819</a><br />
<a href="http://www.newegg.com/Product/Product.asp?Item=N82E16811119093" target="_blank">http://www.newegg.com/Product/Produc...82E16811119093</a><br />
<br />
·Fans and misc...<br />
well i didnt look for fans but i know i gotta snag at least 2 120mm fans, i wrote this at 4:30am ( when i write my longer posts)<br />
and i am very tired so the next day i get to read the nonsense i wrote beforehand and laugh >_< ...<br />
<br />
anything else i left out plz throw at me..<br />
and a random question... i cant mount that triple radiator( even though it is overkill radiator) ontop of the stacker itself? and take out that top case fan?
 

·
Premium Member
Joined
·
7,891 Posts
well ive gotta take off for a couple days (movin down to virginia) but listen to the suggestions that the guys put out here, itll make your life so much easier doing your first water cooling setup, and when there are like 3 or so water cooling guys saying to get the same thing its usually a safe bet that youll be happy with that product<br />
<br />
good luck and GET ER DONE
 

·
Registered
Joined
·
439 Posts
Discussion Starter #19
ok fair enuff mad, i mean i took you guys totally into consid<br><br>
i didnt like blow u guys off so plz dont think that<br><br>
i took alot of references into consid i just havent written all of them down...<br><br>
like the pple on this post.<br><br>
im so close to gettin this done its not a joke but its easy to get distracted<br><br>
when you working on other stuff<br><br>
so maybe im taking that last comment out of context but I AM listening,.otherwise i wouldn't be here.. maybe im just bugging out.. as i have only hasd 4 hiours of sleep since i last posted XD
 

·
Premium Member
Joined
·
22,477 Posts
1- Good pump it's only dc<br><br>
2- Swifty res fine but it's not a bay res<br><br>
3- GPU-Fine<br><br>
4-Get an active cooler with a fan..<br><br>
5- I would get a GT Extreme as Snerp has pointed out but that one is OK...<br><br>
6-Storm fine-If you want to spend a couple bucks more get a V-6 from fstfreddy here on the Forums a lot better block..<br><br>
7- TDX WB -ok...Apogee WB better on lower flow..Both are CPU WB.....<br><br>
8- Tygon tubing fine...<br><br>
If you are going to get a kit go with a Swiftech they have better WB's..<br>
Heres a link to a good one...<a href="http://www.svc.com/h20-220-apex-ul.html" target="_blank">Swiftech Apex Ultra Dual 120mm Water Cooling Kit</a>
 
1 - 20 of 122 Posts
Top