[Phoenix777]

http://www.sidewindercomputers.com/xsacdu5refor.html

what sort of barb do i need for this and the pump? I have 1/2 tubing. And a side question which OD is more popular with 1/2ID?

 

[jmcu]

Any G1/4 X 1/2" barbs will work http://www.sidewindercomputers.com/big1sishfifo.html
Don't forget some clamps.
And for the pump.. this res uses the Laing DDC (MCP350/355) pump.

For the 1/2" ID, I like to use 3/4 OD.

 

[Mongol]

1/2"ID/3/4"OD with a worm drive/clamp.

I use 1/2"ID ad 3/4"OD as well...but that size tubing can be a royal pain to properly route.

 

[Bal3Wolf]

those xspc res bays work good i got my mcp655-b in one cant even hear the dang thing running.

 

[bmaverick]

The EK tops with the 1/2-inch inlet/outlet work best for the DDC 350/355 series of pumps. Martin210 has shown this in the pump reviews and performance charts. Both flow and noise are rated.

As for the bay RES with pump combos, it really depends on the case you have. Some cases are not prone to pump vibration while others are extremely. To test your compute case, put your cell phone on vibrate and lay it on the drive cage. Call the cell phone and notice how well it will resonate in your case.