Overclock.net banner
1 - 3 of 3 Posts

·
Data Recovery Engineer
Joined
·
20,229 Posts
Discussion Starter · #1 ·
Right now I am testing my PC at 3.8GHz 400x9.5

Here are my voltages right now:

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
Load-Line Calibration: Enabled
CPU Vcore….……….........................:1.4
CPU Termination…..... 1.200V*.......: 1.38
CPU PLL…………………....1.500V*.......: 1.5

CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

MCH/ICH
MCH Core…………….....1.100V...........: 1.4
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave

DRAM
DRAM Voltage ……....1.800V............: 2.2
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave
 

·
Registered
Joined
·
668 Posts
Quote:


Originally Posted by Lord Xeb
View Post

Right now I am testing my PC at 3.8GHz 400x9.5

Here are my voltages right now:

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
Load-Line Calibration: Enabled
CPU Vcore….……….........................:1.4
CPU Termination…..... 1.200V*.......: 1.38
CPU PLL…………………....1.500V*.......: 1.5

CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

MCH/ICH
MCH Core…………….....1.100V...........: 1.4
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave

DRAM
DRAM Voltage ……....1.800V............: 2.2
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave

if your getting results by putting those reference voltages up like that then with all do respect go for it....but I have only heard of like .005-.002 jumps at the most....and I think changing one but leaving the other is the correct way...I am not sure though
 

·
Data Recovery Engineer
Joined
·
20,229 Posts
Discussion Starter · #3 ·
Update: Changed my termination to 1.36 and NB to 1.3
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top