Overclock.net banner

Rocker switch hole

403 Views 5 Replies 5 Participants Last post by  emersonsc
I have a pretty common rocker switch with a BLUE LED in it here

anyone have one like this and know what size hole i need to drill to mount it?
1 - 6 of 6 Posts
According to the spec in the link says to use a 3/4in hole saw.
Yeah get a 3/4" holesaw but it needs to be a little bigger. So I recommend cutting the 3/4" hole and then sanding it some more and get as close to .8" as you can. Otherwise the switch won't go in.
I just used a step up bit until the switch fit nice and snug.
Quote:

Originally Posted by vigilante View Post
I just used a step up bit until the switch fit nice and snug.
Those things are awesome.

Emersonsc:

Unibit

You can get them at Home Depot or Lowes, or any home improvement store.
See less See more
  • Rep+
Reactions: 1
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top