Overclock.net banner

41 - 60 of 182 Posts

·
Hardware Enthusiast
Joined
·
645 Posts
Here's some 16GB sticks...

F4-3200C16D-32GVR

4 x 16GB - Confirmed unstable at all speeds 1600 - 2666 MHz and all timings - with and without XMP
2 x 16GB - Stability Unknown



F4-3300C16Q2-128GTZKW

Stability Unknown - Currently being tested.


This set belongs to a different machine. I'm just testing it temporarily on my Ryzen.
 

·
Registered
Joined
·
60 Posts
Corsair Vengence LPX 16GB 3200MHz Hynix M-Die
Still to confirm above 2133MHz as have not had time yet.

 

·
Ryzen Enthusiast
Joined
·
44 Posts
Corsair Vengance LPX CMK16GX4M2Z3200C16

I've been using this kit for a week and it's proved to be stable, so far. XMP works, but I opted to manually enter most of the timings as some were loose.

 

·
Registered
Joined
·
3,601 Posts
I got this ram because it was on sale. Havent been able to get POST at any speed between 2800-3200mhz

*Edit* I did a little tweaking and got it to boot into windows at 3066mhz. 16-17-17-17-38 and adjusted a few other subtimings with SOC at 1.1625v
seems to be running stable so far

G.Skill 16GB 3200mhz c16 F4-3200C16S-16GVK
image.png
 

·
Registered
Joined
·
8 Posts
Quote:
Originally Posted by johndms View Post

CMD16GX4M2B3000C15 listed as containing Samsung B-Die. Seems to also contain Hynix M-Die.
You should check for the Version 4.xx for Samsung, 5.xx for Hynix

BTW, I am looking for one of them and not sure which one is better for Ryzen
CORSAIR Dominator Platinum 32GB 3000MHz (2 x 16GB) CMD32GX4M2B3000C15 Ver 4.31
GSKILL Trident z DDR4. F4-3200C14D-32GTZKO (2x16GB)
Some advise please, I am very appreciated
 

·
Registered
Joined
·
180 Posts

·
Registered
Joined
·
32 Posts
G.Skill Ripjaws V black 8gb (2x4gb) - F4-3466C16D-8gvk



They are on the x99 bench now, will test them once I'll get this ryzen system I am building for a friend
 

·
Registered
Joined
·
790 Posts
What's different between "A-die" and "M-die" ?
 

·
Registered
Joined
·
189 Posts
Contributing!

Memory is Corsair Lpx CMK16GX4M1B3000C15 v5.39 , 1 stick of 16gb ddr4 3000Mhz. I got it running with manual settings at 2933 15-17-17-35 1.35v, soc auto changes from 0.813v to 1.1v with 2933mhz. Motherboard is Asus Strix B350-F, bios version 0902. For some reason inside windows, programs like cpu-z report a cas latency of 16, not 15. The bios reports 15.

 

·
Registered
Joined
·
2,880 Posts
Quote:
G.Skill Ripjaws V 2800 MHz CL14 F4-2800C14D-32GVK 8Gb Samsung B-Die
For me this is Hynix M-die.

Runs at the XMP settings with the given timings no problem, however adding the 3000Mhz CL15 sticks doesn't boot and gives three beeps when I'm using all four slots. Three slots work fine.

Anyone with a 64GB kit here who can give SPD for 2800Mhz?
Quote:
Originally Posted by T0B5T3R View Post

G.Skill RipJaws V black 64GB (4x 16GB), DDR4-3000, CL14-14-14-34 (F4-3000C14Q-64GVK)



oc @ 3200 CL14 1T no problem

snap19102016194022.png 39k .png file
Great.
 

·
Registered
Joined
·
11 Posts
Quote:
Originally Posted by Voodoo Jungle View Post

rich345, your SPD is corrupted. The part number is wrong.
Thanks for letting me know. I ran Thaiphoon Burner again and the SPD read fine this time.

G.Skill Trident Z RGB 64GB (16GB X 4) - F4-3200C14Q-64GTZR

 
41 - 60 of 182 Posts
Top