Overclock.net banner

Sanyo DP26648 LCD TV (Monitor) questions? PLEASE HELP!

1346 Views 3 Replies 2 Participants Last post by  hogans
Hi all,

I am using a Sanyo DP26648 LCD TV for my PC monitor and I have a question that I am hoping you can help me with.

1. When using a DVI to HDMI cable adapter going from my PC to the HDMI input on the TV I am getting a signal when the PC is at the BIOS screen, but as soon as it boots into Windows I get a blank screen and it say's "No signal"?
1 - 4 of 4 Posts
Can you boot to safe mode?

Looks like native resolution is 1366 x 768 pixels, according to this here random site.
2
I havn't tried booting to safe mode...

When using the DVI input on the monitor everything works fine, but when using the HDMI input is when I am not getting a signal.

These are the two different cables that I am using......
LL
LL
See less See more
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top