Overclock.net banner

1 - 13 of 13 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
Is this the fsb for the motherboard and in the ultimate overclocking guide the part where you find the max fsb for your motherboard is there a multiplier for the motherboard?What is it called?
 

·
Registered
Joined
·
75 Posts
Find a better english translator or speak to us in proper english. If you have to, speak in your native language and we'll translate over google. If by chance you are a native english speaker, then maybe you should rephrase your question using proper english syntax, because you're confusing the hell out of people.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #6
My motherboard is the A8N32 SLI Deluxe and in the bios the motherboard fsb is called SB to NB overclock I believe it is confusing and I am a first time overclocker. I just thought it was confusing that it said lower the multiplier to 5-8 in a Section trying to find the max fsb of the motherboard unless it means CPU multiplier. Sorry if this is confusing
 

·
Premium Member
Joined
·
19,923 Posts
Okay, I see what you are saying. I have the manual. "Leave the SB to NB Frequency" on "Auto".

To OC you will want to change the value of the "CPU FSB Frequency" setting.

For now leave the "DDR Clock Skew" on "auto"

Leave all the "Over-Voltage xxx" options on "Disabled"

Raise the "CPU FSB Frequency" in 5 mHz increments and load your Desktop. Use CPUz to verify your Clock speed after each boost....
 

·
Registered
Joined
·
4,033 Posts
Take a look if this is what you talking about and let me know later and is better if you keep the same of the k8 to nb.The k8 to NB is your LTD and you want to lower once you start to increase your FBS.Stock mine is 200x5= 1000.Now I have 271x3=813.You don't want to go higher than 1020 or so.Hope it help.
LL
 

·
Premium Member
Joined
·
45,674 Posts
Quote:

Originally Posted by alexisd View Post
Take a look if this is what you talking about and let me know later and is better if you keep the same of the k8 to nb.The k8 to NB is your LTD and you want to lower once you start to increase your FBS.Stock mine is 200x5= 1000.Now I have 271x3=813.You don't want to go higher than 1020 or so.Hope it help.
A little more on that


The default LDT or Memory Controler multiplyer.
Default setting as he said is 200x5=1000 to keep it stable use..
4x up to about a 260 for the CPU bus speed
drop to 3x above 260.
 
1 - 13 of 13 Posts
Top