Overclock.net banner

screen wont turn on?!

609 Views 8 Replies 5 Participants Last post by  0d3n
first off just a quick background.

My computer before this one trashed video cards left and right.
so i basically rebuilt it.

new mobo new cpu new fans

now my computer worked fine for a few days and all the sudden my screen isnt getting any signal and its shutting off after a boot.

The video card im using is tied directly to the board.

my power unit and my HD are both from the unit before this one.

I have a new HD with SATA control What do I need to turn this thing on?
SATA controller? and SATA power cable?

does it sound like my power unit is doing the baking and should I replace it?

And last did I trash my MOBO or just the video Card on the MOBO?
1 - 1 of 1 Posts

· Registered
Joined
·
1,111 Posts
sounds to me like theres a lot of baking going on....especially by ur mobo....try swapping the card to another mobo and see....btw, did u change the mobo?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top