Overclock.net banner
1 - 6 of 6 Posts

· Registered
Joined
·
374 Posts
Discussion Starter · #1 ·
Friend of mine gave me a Intel Server Board, S3000AH. The manual has a large picture of the board but it doesn't really do much beyond that. I can't figure out how to connect the wires for the front panel (to power it on). The front panel header has 12 pairs(24 pins)

I've tried intel's website and all I could find was an even bigger picture of the exact same diagram, which doesn't show what goes where. I don't want to guess, not sure if that will cause anything bad.

Anyone know where I might be able to find an actual guide or manual so I can get it going? Thanks.
 

· Premium Member
Joined
·
67,312 Posts

· Registered
Joined
·
374 Posts
Discussion Starter · #3 ·
Quote:

Originally Posted by DuckieHo View Post
That's surprising... server components usually have very detailed manuals...
Ya, the online manual (about 200 pages long) was pretty detailed but there was absolutely no specific's about where which wire goes.
 

· Premium Member
Joined
·
67,312 Posts
Quote:

Originally Posted by hokage View Post
Ya, the online manual (about 200 pages long) was pretty detailed but there was absolutely no specific's about where which wire goes.
Found it on page 81: http://www.download.intel.com/suppor...ah_tps_1_1.pdf

It is a SSI 24-pin Front Panel header.
 
  • Rep+
Reactions: hokage
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top