Overclock.net banner
1 - 2 of 2 Posts

·
Registered
Joined
·
550 Posts
Discussion Starter · #1 ·
Hi, I was looking how to permanently set process affinity, and have finally found a way and i'm glad to point out that it works, even on Vista! I am using it myself for gaming.

Method

Download imagecfg.exe from here

on this site, there is enough instruction for you to follow, but for the lazy people, i will repeat this.

1. Download imagecfg.exe
2. Move it to %systemroot%\\system32 (example C:\\Windows\\system32)
3. Run CMD and type the following (example imagecfg -a 0x1 c:\\path\o\\file.exe)

4. Use the following commands to set the executable to your desired core/s

imagecfg -a 0x1 for CPU core 0

imagecfg -a 0x2 for CPU core 1

imagecfg -a 0x3 to reset to both cores

I hope this will help to solve problems
 

·
Premium Member
Joined
·
1,960 Posts
Nice Find. +REP for you
.

Whilst we're on the subject.... Although it's not permanent (i.e. you have to run your prog it from the app each time) there is a nice little app call "Launch'n'Set" which I use when I want to set a prog to run with a specific core.

Get it here if you are so inclined; it's twelfth from the bottom...

Highly-Annoyed
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top