Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
599 Posts
Discussion Starter #1
Hey all,<br />
<br />
I build my Silvertstone PSU I bought for my C2D rig in my turion rig and these power is only ...<br />
<br />
I still got a new OC out of my 6600GT! I run 625MHz on the Core without any probs and 542.5MHz on the ram! That gave me 9848 in 3DMark03 <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
Here are voltages I read out with my multimeter:<br />
<br />
3.3v rail<br />
idle: 3.34v load: 3.31v<br />
<br />
5v rail:<br />
idle: 5.04v load: 5.02v<br />
<br />
12v rail:<br />
idle: 12.18v load: 12.09v<br />
<br />
thought that are good numbers!<br />
This is the PSU I ever saw! Its better than my uncles 620W Liberty and more silent! I can´t still hear it ...<br />
<br />
But the congrats goes not to Silverstone! ETASIS get it!!! <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" />
 

·
Premium Member
Joined
·
24,372 Posts
That PSU is arguably the best single 12V rail PSU out there (except the PC Power & Cooling units).<br />
<br />
Great buy! Enjoy <img src="/images/smilies/smile.gif" border="0" alt="" title="Smile" class="inlineimg" />
 

·
Registered
Joined
·
599 Posts
Discussion Starter #3
Yes! But there is no PC Power & Cooling PSU out with that much amps on 3.3v and 5v rail! Tey are always with 24a or 28a on 3.3v and I need more! I need 30A to run my system stable! I tested a CoolerMaster iGreen Power 500W with 25A on 3.3v rail and I it rains bluescreens ...<br />
<br />
The LC-Power 550W PSU has 32A on 3.3A and runs stable so far!
 
1 - 3 of 3 Posts
Top