Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
Hey guys I recently got into sleeving and am trying to do my first project right now. I have an enermax galaxy evo 1200 watt power supply that I am trying to sleeve. It is not modular and so I had to take it apart to expose majority of the wires. I decided to start with my 24 pin and after removing 2 pins I found that they were connected a little further down the line and I dont know exactly how I should go about sleeving these. There are quite of a few wires that do this same thing and Im thinking it might be too much work for what its worth.

Any light on this subject would be great. Thanks!

 

·
Registered
Joined
·
174 Posts
Lutro0 has a vid that will show you how to sleeve these. The first part of the vid covers actually making the cable so if you want, you can skip forward. Sleeving starts around 18 minutes in.
https://www.youtube.com/watch?v=uXaKt-tiVI0
 
  • Rep+
Reactions: mj23kb24
1 - 3 of 3 Posts
Top