Overclock.net banner
1 - 10 of 10 Posts

·
Registered
Joined
·
2,245 Posts
Discussion Starter · #1 ·
Whats the difference between this Deluxe and Professional wire sleeving kit? Do I need all of that?
http://www.performance-pcs.com/catal...oducts_id=1645
http://www.performance-pcs.com/catal...roducts_id=833

Whats your guys opinion as far as blue sleeving, white or black? I want just one single color not a mix. All of my fans and LEDs are blue, i have an Asus mobo so theres blue and white on it. my kink-coils on Wc tubes are blue. Im not sure if i want to do a full blue scheme or a combination of like blue and white.

Also where can I get a complete set of white or blue connectors?
Last question, would different companies blues be slightly different? im worried the connectors and the sleeving verses the LED color, mobo blue etc are going to be different.

Thanks in advance
 

·
Registered
Joined
·
1,845 Posts
i think a darker blue would go nice, and then just a few cables sleeved white would go well with it, like 70/30 (70% blue 30% white)
as far as difference in colors, i would assume each company has a different color blue probably.
good luck will be looking forward to seeing your sleeving job!
 

·
Registered
Joined
·
2,245 Posts
Discussion Starter · #3 ·

·
Registered
Joined
·
3,445 Posts
The only difference I see between the two is that with the Deluxe you get 2 more Tie Wraps, otherwise no difference.

IMHO not worth getting the Deluxe.
 

·
Registered
Joined
·
3,445 Posts
There's one company I know that makes amazing cable sleeving kits, but I can't remember the name for some reason. I'll post as soon as I remember its on the tip of my tongue but I can't remember for the life of me what it was.

EDIT: http://www.murdermod.com/sleeving-kits.htm

That's what it was! They have THE BEST stuff, a bit more expensive but you get what you pay for, they have great quality sleeving.
 

·
Registered
Joined
·
3,445 Posts
Quote:

Originally Posted by tlxxxsracer View Post
Ya.. Thats just a little expensive

Just wondering what size sleeving I need to do my psu, sata cables? (if i didnt get that mod kit)
Also like i asked previously, has anything used one of those kits?
I don't know for the SATA cables, but all the other sizes you need will be in the kit, you might need some extra if you plan on sleeving each individual wire that goes into the 20+4 pin connector on the PSU. Otherwise the sizes are there, but I'd lie to you if I told you a size for the SATA cables.
 

·
Registered
Joined
·
865 Posts
First off look through this thread!

Then look at what they suggest!!
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top