Overclock.net banner

1 - 20 of 177 Posts

·
SNERP!!!
Joined
·
4,183 Posts
Discussion Starter #1
So I said I'd make a build log. Here's the start kids. I'm not 100% sure what I have since these are engineering samples. I'm guessing they are: <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16819117080" target="_blank">THIS</a> or <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16819117079" target="_blank">THIS</a>. We'll have to wait and see when I get it setup. I've already put my conformal all over the board near the sockets and I'm selling off my current PC. The CPUs will be cooled with chilled water. I do have a few questions.<br />
<br />
<b><u>Update: 11/04/06</u></b> <br />
<br />
So I bought my RAM and PSU I ended up with <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820134085" target="_blank"> Kingston 1GB 240-Pin DDR2 FB-DIMM ECC Fully Buffered DDR2 667 (PC2 5300)</a> and <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16817703006" target="_blank"> PC Power & Cooling Silencer 750 EPS12V EPS12V 750W Power Supply</a><br />
<br />
I'm also getting my water cooling setup. Here's pics of what I'm buying:<br />
<br />
(pics dead)<br />
<br />
The guy has a broken pump that he'll toss in for free. He cracked it by over tightening a fitting. He said he fiberglassed it and it fixed the leak. If I don't like the job he did I'll fix it myself. Not too bad for $70 eh? Old and ghetto, but it will work very well on the chiller setup.<br />
<br />
<u><b>UPDATE: 11/06/06</b></u><br />
<br />
So it turns out that the CPU blocks he had were taken to goodwill by his wife. <img src="/images/smilies/mad.gif" border="0" alt="" title="Mad" class="inlineimg" /> So I'm out $80 on 2 MAZE blocks. I wish he would have found that out before I spent $10 in shipping at jab-tech for stuff I could have bought with this order.<br />
<br />
I hope everything comes in on Wednesday and I can pick it up on Thursday.<br />
<br />
Another 11/06/06 Update <img src="/images/smilies/rolleyes.gif" border="0" alt="" title="Roll Eyes (Sarcastic)" class="inlineimg" /><br />
<br />
The pump I'm getting for free is a Hydor Seltz L30. It isn't a monster, but it will do. Did I mention it was free? <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /> Also, my tubing and fill port arent' going to be in till FRIDAY! <img src="/images/smilies/mad.gif" border="0" alt="" title="Mad" class="inlineimg" /> To top that one off, I had to get it shipped to my apartment where they can't drop off a package, so I sure hope they are open on Saturday for package pickup...<br />
<br />
<b><u>UPDATE: 11/09/06</u></b><br />
<br />
So I should be getting my PSU/RAM today, Waterblocks tomorrow, my tubing and fillport on Sat and somewhere in there I should be getting the rad and pump. I'm thinking of running up to Fry's and snagging an air cooler that will fit with the Xeon mounting and getting this mofo runnin' with one CPU <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
pt 2:<br />
<br />
Got my rad and pump. The Rad turned out to be a BIP II, but it will work, so whatever. The pump has a super ghetto repair job on it, but what do you want for free? <img src="/images/smilies/smile.gif" border="0" alt="" title="Smile" class="inlineimg" /> Headed home in a bit to my PSU and RAM YAY!!!!<br />
<br />
HOME:<br />
<br />
Got it...damn is it sexness! PICS!!!<br />
<br />
PSU of the Gods!<br />
<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img452.imageshack.us/img452/5527/psuram003ui0.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img96.imageshack.us/img96/258/psuram011nb8.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img96.imageshack.us/img96/6797/psuram012xl7.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
<a href="http://imageshack.us" target="_blank">[img=http://img152.imageshack.us/img152/314/psuram014jq1.jpg]</a><br />
<br />
The most expensive 1GB stick of RAM I've ever seen<br />
<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img488.imageshack.us/img488/1045/psuram023tm6.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img246.imageshack.us/img246/7530/psuram025nu5.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
Just shy of $400...<br />
<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img488.imageshack.us/img488/4015/psuram018gd2.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
Well there are the pics for the night. I left my Rad and pump at work so those will have to wait till later.<br />
<br />
I just went to the hardware store to get some fittings for the chiller. Bass fittings cost too much! $29 BAH! They didn't have any cork tape or seal string like they use for HVAC stuff, so I'll go to an AC shop sometime this weekend.<br />
<br />
<b>UPDATE: 11/10/06</b><br />
<br />
Got my MAZE blocks. I have the clear plastic tops and man is the inside gorgeous. I always love seeing brand new water blocks. I should either get my tubing & fillport tonight or tomorrow and then the fun will begin.<br />
<br />
2nd update of the day:<br />
<br />
I have NEVER had any problems with UPS till this build. Now I Fing hate them. They are slow, their coustomer service sucks, they screwed up and for some reason couldn't call the god damn number on the package!!! Oh, and to top it off they won't redeliver till Monday. All this why? because Jabtech didn't put my apt number on the box. I've got a call into the service center about a pickup on my way home from work. They have 30mins to call me back or no tubing/fillport for me till Monday. Maybe I can get some decent stuff somewhere around there instead...<br />
<br />
pissed...<br />
<br />
<b>Update: 11/11/06</b><br />
<br />
I am on a mission. Coffee, Sears, Hardware Store...This is comming together TODAY<br />
<br />
<b>Update: 11/12/06</b><br />
<br />
I lied It didn't happen this weekend. I'm just going to wait till I get my tubing. I could only find 1/2"ID-5/8"OD and I couldn't find any cork tape. I have some liquid electrical tape, so I'll just use that on the spots I missed with conformal.<br />
<br />
<b>UPDATE: 11/13/06</b><br />
<br />
I finally got my tubing and fillport from jab-tech. I sprayed the back of the motherboard with rubber coating and I've got the system together for leak testing for the night. I'll be putting the entire thing together minus the chiller tomorrow. I'm going to just watercool it for now and once I get all the chiller stuff sorted I'll put it together.<br />
<br />
late night:<br />
<br />
UHHHHH!!!!!! THE PUMP IS LEAKING!!!<br />
<br />
I'll pick one up local...<br />
<br />
<b>Update: 11/14/06</b><br />
<br />
So here's the plan... break off all the crap that the guy tried to fix the pump with. Go crazy with JB Quik Weld and let it sit for a few hours. Quick leak test the pump. Install everything and boot that motha' up! Only problem is I still don't have the drivers for the motherboard...I've emailed the guy who hooked up all the free stuff, but he hasn't responded for over a week...I dunoo what to think. <img src="/images/smilies/confused.gif" border="0" alt="" title="Confused" class="inlineimg" /><br />
<br />
Another Update:<br />
<br />
FINALLY!!! GOOD NEWS!!!<br />
<br />
A rep from the company who made the chiller just emailed me. It was being sent to my junk mail! <img src="/images/smilies/redface.gif" border="0" alt="" title="Embarrassment" class="inlineimg" /> He was nice enough to log into his personal Yahoo mail account to email me. Very cool. So I should have the chiller figured out very soon! <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
<b>UPDATE: 11/15/06</b><br />
<br />
I went crazy last night and repaired the pump. It now has JB weld all over it, but it doesn't leak anymore! I cut a small piece of neoprene to fit in the hole under the CPU and put dielectric grease on the pins. I installed the MAZE blocks and at first they didn't fit. The mounting bumped into the other mounting on each block. Luckily I didn't need that piece so I just chopped it off. <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
My video card should be here by Friday. I think I'm just going to wait for it and in the mean time get the chiller up and running. No reason to rush it and waste my time. I'm gonna get some Vaseline & Distilled water tonight and cut the neoprene to fit the motherboard. I think I'll fire up the Chiller too and see how well it works <img src="/images/smilies/smile.gif" border="0" alt="" title="Smile" class="inlineimg" /><br />
<br />
*you'll get pics tonight <img src="/images/smilies/thumb.gif" border="0" alt="" title="Thumb" class="inlineimg" />*<br />
<br />
<b>11//16/06</b><br />
<br />
I <i>stupidly</i> let my girlfriend talk me into going to the mall with her "real quick"...4 hours later I got home. I messed with the neoprene around the socket and that's about it.<br />
<br />
update:<br />
<br />
WOOT! Got my video card! I'm going to put off the chiller for now and get this motha up and running tonight!<br />
<br />
Work:<br />
<br />
Well I needed a DVI to VGA adapter for my video card so I went to a local PC store and they were out. The guy I asked about it was bending back the pins on a 939 chip that looked like it had been dropped. I then went to CC and over heard a guy tell some older people that their camera won't work unless they buy Monster Cables. Then I went to CompUSA and the adapter was $30 and then to Office Max where it was $25. At Office Max I was informed that the Belkin adapter was expensive because Belkin manufactures very high quality cables. I remembered I had an extra at home and left.<br />
<br />
Ok, well I got the CPU insulation fixed and everything in the case. I was about ready to install my water cooling, when I realized I forgot to snag some tubing clamps when I was at the hardware store. Oh well...<br />
<br />
PICS!<br />
<br />
Leak test! It failed...The pump leaked<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img205.imageshack.us/img205/284/psuram031ub2.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
But I fixed it! Thanks JB Weld!<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img84.imageshack.us/img84/8816/psuram034rc4.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
Spray Rubber on the back of the mobo<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img226.imageshack.us/img226/7403/psuram032xq6.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
MAZE CPU Block<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img167.imageshack.us/img167/299/psuram039rw8.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
Mounting Hardware<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img243.imageshack.us/img243/3448/psuram046uc0.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
You can see how the block's mounting touched and how I "fixed" it <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<a href="http://imageshack.us" target="_blank"><img src="http://img134.imageshack.us/img134/6403/psuram049hz9.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
MONEY SHOT!!!<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img137.imageshack.us/img137/5704/psuram057un8.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
So there it is kids...the pics. Should be running tomorrow. Computer stuff ALWAYS takes longer than I think it will, but I'm a nut when it comes to getting everything right the first time. <img src="/images/smilies/thumb.gif" border="0" alt="" title="Thumb" class="inlineimg" /><br />
<br />
<b>UPDATE: 11/18/06</b><br />
<br />
I'm at my wits end...I don't have a manual to refer to, the guy that gave me the stuff won't email me back and I can't get it to boot. I think I'm going to go up to Fry's and buy a LGA775 mobo & some nice DDR2. Maybe I'll just sell the extra chip to cover the cost of all this stuff. Since the guy won't even email me back, I don't need to worry about severing my ties...whatever...I'm going to bed.<br />
<br />
Ugh...my life is getting in the way. I think I'm just going to return the RAM and get an ASUS P5B Delux with 2GB of Firesticx...these boards seem sketch to say the least.<br />
<br />
<b>UPDATE: 11/20/06</b><br />
<br />
IT'S OVER!!! I don't even feel like messing with the motherboards. It would be one thing if I had drivers, but trying to make a build without drivers and manual is like blindfolding yourself then sprinting through a mine field after you have had a few drinks. I'm going to RMA the RAM and get the P5B lux and the Buffalo RAM. I think that will be the best bet getting these chips some up to some crazy speeds.<br />
<br />
After all this I'm hurting on money. I get paid on Friday, but I have to pay rent with that check, so it could be awhile before I have my computer running. <img src="/images/smilies/frown.gif" border="0" alt="" title="Frown" class="inlineimg" /> After all that I'll prob toss the other Xeon in a cheaper board and have it for a 24/7 folder.<br />
<br />
Oh well. Turkey Day and my 21st B-Day will keep me busy <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
<b>UPDATE: 11/28/06</b><br />
<br />
Thanksgiving was great! It looks like this should be comming together as a single CPU build. I just bought an open box <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16813131045" target="_blank">P5B Deluxe</a> from newegg for $143.99 w/ free shipping & I'm getting a <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820227090" target="_blank">Dual Channel OCZ Gold 2x1GB DDR2 1000 Kit</a> For $290 shipped. The RAM has D9 ICs on it so this combo should be very nice.<br />
<br />
<b>UPDATE: 12/04/06</b><br />
<br />
I got my Motherboard today and I ended up buying Chozart's 2 GB kit Corsair DDR2 800 6400C4. I should be able to put this together tonight. I hope I only "modded" one of the MAZE blocks, so I can use it tonight. We'll see.<br />
<br />
<b>UPDATE: 12/04/06</b><br />
<br />
So the block would work if it would fit. The P5B capasators around the socket are in the way of the beefy maze block. I have $.15 in my checking account so I can't buy an air cooler. Maybe I'll drive to Fry's tonight and write a check. I get paid on the 8th so that should work out fine. <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
<b>UPDATE: 12/07/06</b><br />
<br />
I had my parents transfer me some money so I could snag a BT from Radio Shack tonight because I get paid an hour later than the store is open. I also have a $10 off Radio Shack coupon, so it will work. I'll head there after work and I'll be sure to take a bunch of pics while I'm putting this sucker together.<br />
<br />
The cool thing about having the BT is it will let me play with the chiller and start to get that all together after I have gone on a gaming binge for a week or two. <img src="/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" /><br />
<br />
<b>UPDATE:<br />
<br />
<br />
IT'S ALIVE!!! IT'S ALIVE!!!</b><br />
<br />
I'm loading windows now screenshoots and pics to come! HAHAHAHAHAHAHAHA!!!<br />
<br />
Snerp Fuel for this build<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img291.imageshack.us/img291/6503/build003uz6.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
It's together<br />
<a href="http://imageshack.us" target="_blank"><img src="http://img139.imageshack.us/img139/4759/build009vy2.jpg" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /></a><br />
<br />
Not a ton of pics, but I'm sure you get the idea...I'll be sure to give screenshots!<br />
<br />
<img src="http://www.overclock.net/attachments/intel-build-logs/36707-snerps-xeon-build-unlocked-chilled-12-screenshot1.jpg?d=1165564676" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /><br />
<br />
<img src="http://www.overclock.net/attachments/intel-build-logs/36708-snerps-xeon-build-unlocked-chilled-12-screenshot2.jpg?d=1165564676" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /><br />
<br />
<img src="http://www.overclock.net/attachments/intel-build-logs/36709-snerps-xeon-build-unlocked-chilled-12-screenshot3.jpg?d=1165564676" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /><br />
<br />
<img src="http://www.overclock.net/attachments/intel-build-logs/36710-snerps-xeon-build-unlocked-chilled-12-screenshot4.jpg?d=1165564676" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /><br />
<br />
<img src="http://www.overclock.net/attachments/intel-build-logs/36711-snerps-xeon-build-unlocked-chilled-12-screenshot5.jpg?d=1165564676" border="0" alt="" onload="NcodeImageResizer.createOn(this);" /><br><a href="http://assets.overclock.net.s3.amazonaws.com/7/76/76950545_vbattach36707.jpeg"><img src="http://www.overclock.net/image/id/614368/width/525/height/525/flags/LL"></a><br><a href="http://assets.overclock.net.s3.amazonaws.com/7/74/7436226d_vbattach36708.jpeg"><img src="http://www.overclock.net/image/id/614367/width/525/height/525/flags/LL"></a><br><a href="http://assets.overclock.net.s3.amazonaws.com/7/75/75f10593_vbattach36709.jpeg"><img src="http://www.overclock.net/image/id/614366/width/525/height/525/flags/LL"></a><br><a href="http://assets.overclock.net.s3.amazonaws.com/9/9c/9c4a0e17_vbattach36710.jpeg"><img src="http://www.overclock.net/image/id/614365/width/525/height/525/flags/LL"></a><br><a href="http://assets.overclock.net.s3.amazonaws.com/c/cc/cc42d152_vbattach36711.jpeg"><img src="http://www.overclock.net/image/id/614364/width/525/height/525/flags/LL"></a>
 
  • Rep+
Reactions: Fishie36

·
Premium Member
Joined
·
4,543 Posts
Apparently none of your items exist :S
 

·
Registered
Joined
·
4,996 Posts
uh... i can't get to the links. i would suggest the PCP&C 610 for teh PSU and as for RAM, some good G.Skill or w/e ncsa was using.
 

·
Premium Member
Joined
·
4,543 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

<div>
Originally Posted by <strong>cgrado</strong>
<a href="showthread.php?s=5f012238fa36186cbb85825ea8d4fba8&p=1386413#post1386413" rel="nofollow"><img class="inlineimg" src="http://static.overclock.net//img/forum/go_quote.gif" border="0" alt="View Post" /></a>
</div>
<div style="font-style:italic">uh... i can't get to the links. i would suggest the PCP&C 610 for teh PSU and as for RAM, some good G.Skill or w/e ncsa was using.</div>

</td>
</tr>
</table>
</div>Server motherboard won't work with the G.skill<br />
<br />
He needs ECC ram. The PCP&P psu should be enough though.
 

·
Banned
Joined
·
2,586 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

<div>
Originally Posted by <strong>cgrado</strong>
<a href="showthread.php?s=5f012238fa36186cbb85825ea8d4fba8&p=1386413#post1386413" rel="nofollow"><img class="inlineimg" src="http://static.overclock.net//img/forum/go_quote.gif" border="0" alt="View Post" /></a>
</div>
<div style="font-style:italic">uh... i can't get to the links. i would suggest the PCP&C 610 for teh PSU and as for RAM, some good G.Skill or w/e ncsa was using.</div>

</td>
</tr>
</table>
</div>i would get pc p&c silencer 750. its only like $39 more.
 

·
SNERP!!!
Joined
·
4,183 Posts
Discussion Starter #6
I've got the PCP&C 750W Silencer linked. I'll look at the ram when I get home.
 

·
Registered
Joined
·
4,996 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

<div>
Originally Posted by <strong>****erfx</strong>
<a href="showthread.php?s=5f012238fa36186cbb85825ea8d4fba8&p=1386418#post1386418" rel="nofollow"><img class="inlineimg" src="http://static.overclock.net//img/forum/go_quote.gif" border="0" alt="View Post" /></a>
</div>
<div style="font-style:italic">Server motherboard won't work with the G.skill<br />
<br />
He needs ECC ram. The PCP&P psu should be enough though.</div>

</td>
</tr>
</table>
</div>unless it's one of <a href="http://www.newegg.com/Product/ProductList.asp?Category=34&N=2010340343+50001157+1051707842+1050706986&Submit=ENE&SubCategory=343" target="_blank">these</a> xeons. They don't need ECC.
 

·
Premium Member
Joined
·
4,543 Posts
He has dual xeons which requires a server board. Server boards usually use ECC ram.
 

·
Registered
Joined
·
4,996 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

<div>
Originally Posted by <strong>****erfx</strong>
<a href="showthread.php?s=5f012238fa36186cbb85825ea8d4fba8&p=1386474#post1386474" rel="nofollow"><img class="inlineimg" src="http://static.overclock.net//img/forum/go_quote.gif" border="0" alt="View Post" /></a>
</div>
<div style="font-style:italic">He has dual xeons which requires a server board. Server boards usually use ECC ram.</div>

</td>
</tr>
</table>
</div>ok, duals. ya, they need ECC. i don't know what is good ECC ram though.<br />
<br />
i'll take a stab at <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820134113" target="_blank">these</a> though. maybe they're good.
 

·
Registered
Joined
·
2,087 Posts
Excuse me if I may...<br />
<br />
YES IT WORKS LIKE A CHAMp!<br />
<br />
Single chip. dual core.<br />
<br />
I currently have a Xeon 3060 on an Asus P5n-SLI board. The board isnt a very good overclocker, but the chip runs like nothing else!<br />
<br />
It has a conroe core. I have this thing running at 2.9ghz on stock cooling running at 42 C load temp.<br />
<br />
THESE XEONS ARE GOOD! <img src="/images/smilies/thumb.gif" border="0" alt="" title="Thumb" class="inlineimg" /><br />
<br />
Oh, they are sockt775 and dont need ECC or registered ram.
 

·
SNERP!!!
Joined
·
4,183 Posts
Discussion Starter #11
I was wanting to know if I would be better off with These: <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820134112" target="_blank">http://www.newegg.com/Product/Produc...82E16820134112</a><br />
or <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820134085" target="_blank">http://www.newegg.com/Product/Produc...82E16820134085</a> (what is Fully Buffered?)<br />
or <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820609177" target="_blank">http://www.newegg.com/Product/Produc...82E16820609177</a><br />
or <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820134332" target="_blank">http://www.newegg.com/Product/Produc...82E16820134332</a><br />
or WHAT?
 

·
Premium Member
Joined
·
4,543 Posts
The first one looks best, but is it ECC?
 

·
Registered
Joined
·
4,996 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

<div>
Originally Posted by <strong>Snerp</strong>
<a href="showthread.php?s=5f012238fa36186cbb85825ea8d4fba8&p=1386882#post1386882" rel="nofollow"><img class="inlineimg" src="http://static.overclock.net//img/forum/go_quote.gif" border="0" alt="View Post" /></a>
</div>
<div style="font-style:italic">I was wanting to know if I would be better off with These: <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820134112" target="_blank">http://www.newegg.com/Product/Produc...82E16820134112</a><br />
or <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820134085" target="_blank">http://www.newegg.com/Product/Produc...82E16820134085</a> (what is Fully Buffered?)<br />
or <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820609177" target="_blank">http://www.newegg.com/Product/Produc...82E16820609177</a><br />
or <a href="http://www.newegg.com/Product/Product.asp?Item=N82E16820134332" target="_blank">http://www.newegg.com/Product/Produc...82E16820134332</a><br />
or WHAT?</div>

</td>
</tr>
</table>
</div>To settle it, snerp, what socket are your xeons?
 

·
Premium Member
Joined
·
4,543 Posts
<div style="margin:20px; margin-top:5px; ">
<div class="smallfont" style="margin-bottom:2px">Quote:</div>
<table cellpadding="6" cellspacing="0" border="0" width="99%">
<tr>
<td class="alt2" style="border:1px inset">

<div>
Originally Posted by <strong>cgrado</strong>
<a href="showthread.php?s=5f012238fa36186cbb85825ea8d4fba8&p=1386903#post1386903" rel="nofollow"><img class="inlineimg" src="http://static.overclock.net//img/forum/go_quote.gif" border="0" alt="View Post" /></a>
</div>
<div style="font-style:italic">To settle it, snerp, what socket are your xeons?</div>

</td>
</tr>
</table>
</div><br />
He doesn't know. They are most likely socket 771 though.
 

·
SNERP!!!
Joined
·
4,183 Posts
Discussion Starter #17
Isn't 771 just two 775 sockets?<br />
<br />
...They are all DDR2
 

·
Registered
Joined
·
1,929 Posts
its a physicaly differnt soket if its the same then by all means try getting 2 differnt bords and 2 sets of ram ecc ram sux and server mobos dont oc
 

·
Registered
Joined
·
2,661 Posts
Wait isn't this for those awsome engineiring cpus you got?
 
1 - 20 of 177 Posts
Top