[Arclite]

Do i need to flash the bios, and if so what bios is unlocked?

If not is there something i dont have set up correctly with afterburner? I tried trixx and it doesnt work with my card.

 

[Kick]

my 6950 goes up to 13xx

is your config set right? no need to flash your bios.
it's reference right?

 

[Blackout51]

Have you tried
close MSIab
C:\\Program Files (x86)\\MSI Afterburner
open MSIAfterburner.cfg in notepad

change EnableUnofficialOverclocking
to
EnableUnofficialOverclocking= 0
save
start MSIab

 

[Arclite]

yes its a reference card. im not sure about the config what specifically do i need to set?
heres my config for ab
[Properties]
ShowGeneralTab= 1
ShowFanTab= 1
ShowMonitoringTab= 1
ShowOnScreenDisplayTab= 1
ShowScreenCaptureTab= 1
ShowVideoCaptureTab= 1
ShowProfilesTab= 1
ShowUserInterfaceTab= 1

[Settings]
Skin = compact.usf
StartMinimized= 0
StartWithWindows= 0
RememberSettings= 0
FirstRun= 1
FirstUserDefineClick= 1
FirstServerRun= 1
HwPollPeriod= 1000
MMIOPageSize= 4
PCIBusFilter= -10h
ShowTooltips= 1
ShowHints= 1
PauseInSuspendedMode= 1
CurrentGpu= 0
Sync= 1
AttachMonitoringWindow= 1
MonitoringWindowOnTop= 1
ShowPerformanceProfilerStatus= 0
LCDFont= font4x6.dat
LCDScrollTimerPeriod= 30
UnlockVoltageControl= 1
UnlockVoltageMonitoring= 1
ShowOSDTime= 0
RestoreAfterSuspendedMode= 0
StartupViaTaskScheduler= 1
StartupDelay= 0
MinMonitoringGraphHeight= -1
LocalizationDebugFlags= 0
EnableLog= 0
RecreateLog= 0
LogPath=
DontStopLoggingOnWriteFailure= 0
LogLimit= 10
ForceConstantVoltage= 0
AllowCaptureVoltageDefaults= 0
Link= 1
UseDirectInputHotkeyHandler= 1
SendToTrayOnClose= 0
DataFilteringThreshold= 10
ScreenCaptureFolder=
ScreenCaptureFormat= bmp
ScreenCaptureQuality= 100
VideoCaptureFormat= MJPG
VideoCaptureFolder=
VideoCaptureQuality= 85
VideoCaptureFramerate= 30
VideoCaptureFramesize= 2
VideoCaptureThreads= FFFFFFFFh
FanSpeedReadbackDelay= 1000
CaptureOSD= 1
AudioCaptureFlags= 00000003h

[ATIADLHAL]
UnofficialOverclockingEULA= 1
UnofficialOverclockingMode= 1
AccessibilityCheckingPeriod= 0

[NVAPIHAL]
ClockDomainIdWorkaround= -1

 

[Blackout51]

Quote:

Originally Posted by Arclite yes its a reference card. im not sure about the config what specifically do i need to set? heres my config for ab [Properties] ShowGeneralTab= 1 ShowFanTab= 1 ShowMonitoringTab= 1 ShowOnScreenDisplayTab= 1 ShowScreenCaptureTab= 1 ShowVideoCaptureTab= 1 ShowProfilesTab= 1 ShowUserInterfaceTab= 1 [Settings] Skin = compact.usf StartMinimized= 0 StartWithWindows= 0 RememberSettings= 0 FirstRun= 1 FirstUserDefineClick= 1 FirstServerRun= 1 HwPollPeriod= 1000 MMIOPageSize= 4 PCIBusFilter= -10h ShowTooltips= 1 ShowHints= 1 PauseInSuspendedMode= 1 CurrentGpu= 0 Sync= 1 AttachMonitoringWindow= 1 MonitoringWindowOnTop= 1 ShowPerformanceProfilerStatus= 0 LCDFont= font4x6.dat LCDScrollTimerPeriod= 30 UnlockVoltageControl= 1 UnlockVoltageMonitoring= 1 ShowOSDTime= 0 RestoreAfterSuspendedMode= 0 StartupViaTaskScheduler= 1 StartupDelay= 0 MinMonitoringGraphHeight= -1 LocalizationDebugFlags= 0 EnableLog= 0 RecreateLog= 0 LogPath= DontStopLoggingOnWriteFailure= 0 LogLimit= 10 ForceConstantVoltage= 0 AllowCaptureVoltageDefaults= 0 Link= 1 UseDirectInputHotkeyHandler= 1 SendToTrayOnClose= 0 DataFilteringThreshold= 10 ScreenCaptureFolder= ScreenCaptureFormat= bmp ScreenCaptureQuality= 100 VideoCaptureFormat= MJPG VideoCaptureFolder= VideoCaptureQuality= 85 VideoCaptureFramerate= 30 VideoCaptureFramesize= 2 VideoCaptureThreads= FFFFFFFFh FanSpeedReadbackDelay= 1000 CaptureOSD= 1 AudioCaptureFlags= 00000003h [ATIADLHAL] UnofficialOverclockingEULA= 1 UnofficialOverclockingMode= 1 AccessibilityCheckingPeriod= 0 [NVAPIHAL] ClockDomainIdWorkaround= -1

Change that to UnofficialOverclockingMode= 0

 

[Arclite]

still wont let me get above 950/1450

 

[Blackout51]

did you make sure MSI AB was closed before you edited and re-saved the file?

 

[sub50hz]

Quote:

* Set UnofficialOverclockingEULA field to the following text: I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it * Set UnofficialOverclockingMode to 1 to keep PowerPlay active (may not work on old ASICs), 2 to traditionally disable PowerPlay or to 0 to temporary disable unofficial overclocking path

This.

 

[Blackout51]

Did they really change it to that? It's been a while, I'm on 2.0.0, mine doesn't have the EULA. So I guess I'm half right haha. So did that work?

 

[Arclite]

Quote:

Originally Posted by sub50hz;13020389
This.

Sub50hz that fixed it thank you. I remember reading about that change when the current version of ab came out but i drew a complete blank.

Thanks everybody for the assistance!

 

[sub50hz]

Np.

 

[Mit Namso]

Quote:

Originally Posted by Arclite still wont let me get above 950/1450

For me MSIAB goes to a massive 840/1325

Luckily TRIXX goes to 1200/1800

But I have to use MSIAB for the voltage control

 

[sub50hz]

Quote:

Originally Posted by Mit Namso For me MSIAB goes to a massive 840/1325 Luckily TRIXX goes to 1200/1800 But I have to use MSIAB for the voltage control

A solution is in this thread. I'll quote it again for you.

Quote:

* Set UnofficialOverclockingEULA field to the following text: I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it * Set UnofficialOverclockingMode to 1 to keep PowerPlay active (may not work on old ASICs), 2 to traditionally disable PowerPlay or to 0 to temporary disable unofficial overclocking path

 

[kcuestag]

Quote:

Originally Posted by sub50hz A solution is in this thread. I'll quote it again for you.

Thanks, I was looking for a way to get above 950/1450 as well!