Some questions for my mod

Working on a new mod called Imolation (yes that's the correct spelling, see the mod first). I have a couple of general mod questions that hopefully you guys can answer.

answeredWhere can one get a quality UV light? I am trying to avoid Logysis as much as possible since their products are usually cheap and tacky. Also, the on/off PCI bracket is quite unprofessional.. Do they come with nicer looking switches (a la murderbox) or do I have to do my own modding?

answeredHow hard is it to cut a professional looking case window and what tools would it take? The reason I ask is because i have the option of getting the TJ07 without the window for over $100 less than with the window, but you can't simply buy a new side panel because of the way it's constructed. I'm aiming for something like this:
http://www.imagehost.co.za/uploads/2dsa5hwsxkef63dx.jpg

1) What's the best way to mount a rad in the bottom of a TJ07? I want the best possible rigidness because I don't want the radiator to come loose while I'm moving the case or something.

2) I'm going to have 6 fans down in the rad section.. what's the quickest and easiest way to power them? I just want them all at full power so no need for a fan controller. I don't want to piggy back them or anything that would make them perform worse.

3) What's a good sleeving kit? I want to sleeve all my case fan cables and some other unsightly cables around the case, but not the PSU

4) What's a good sound dampening material? They range in price from $10 to $50 and I need to make an educated decision choosing what will give best bang for the buck.

That's it for now, but may have questions later. Thanks!