Overclock.net banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,702 Posts
Discussion Starter #1
OK first off i have a cpu temp monitor that is reading 39*c load and my everest software says its like 48*c load, which do i trust?

ok now on my real topic: i have my cpu fsb at 250 and my multiplier at 9.5x(stock is 12x and 200) and the :voltages increase thingy wwont go any higher than 1.550v and i cant go any higher in speed except 2374mhz.
Why cant i cant go any higher than 250 fsb at 9.5x?(im talking about the rig in my signature)
 

·
Premium Member
Joined
·
45,674 Posts
An FYI, if your BIOS is reporting the temp correctly it is aprox. 80% of the full load temp.
 

·
Registered
Joined
·
1,218 Posts
Try these settings, if you aren't familiar with what I'm talking about, read the overclocking guides..

260 x 10
Vcore 1.55
HTT x 4
Memory divider "memclock" 200 (1:1)
Memory timings default
Memory voltage 2.7
 

·
Registered
Joined
·
2,234 Posts
LOL. I have gotten a few PMs about why bwomp is bumping on my name.

bwomp969 lives down the street from me. He came up to my house and got on my computer. He couldn't get my account to log off (for whatever reason, it wouldn't logoff) so he bumped this thread while on my account.

Hope that clears up any confusion
 
1 - 6 of 6 Posts
Top