Overclock.net banner

[Sponsored] F-ROG

4275 Views 42 Replies 2 Participants Last post by  neSSa
Dear friends,

I'm starting a new project called F-ROG. It is based on the Tower-Mod Asus Z11 case. This is a mITX build and will require a lot of precise measurement and operation.

The idea is to make a separate metal frame that will carry the Z11 and the radiator on the outside. This bracket will also have feet due to the reclined position of the case. There will be a lot of making aluminum parts and masks, as well as a special distro / reservoir.

I thank ASUS, Intel, EKWB, Patriot VIPER,Seasonic and CableMod for their help.

Hardware:

Intel i7 11700K
Asus z590-i STRIX
Asus Z11
Asus Radeon 6700XT (stand by)
Patriot Viper 2x32Gb 3600Mhz RAM
Patriot Viper M.2 1Tb
Patriot SSD 1Tb
Seasonic CONNECT 750
CableMOD custom cables for PSU
EKWB all water cooling parts and components

(The list will be edited later)

Thanks for following and I hope you will enjoy the project worklog!

neSSa :)



1 - 20 of 43 Posts

· Registered
Joined
·
904 Posts
Discussion Starter · #13 ·
Cablemod does not originally produce cables for SS Connect power supply, these are cables for another model of Seasonic power supply, PinOut is not identical and I will have to relocate certain wires!





 
1 - 20 of 43 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top