Overclock.net banner
1 - 2 of 2 Posts

·
Registered
Joined
·
995 Posts
Discussion Starter · #1 ·
Ok, so I've been running OCCT for about 17 minutes now (which in my book = 2 hours in Prime 95), and my temperatures have only touched 54C and averages around 52C. It's a good 4GHz overclock, but that means that I have to have a 1.536 vCore. Vdroops around 1.472 average, but as low as 1.456. Should I drop my voltage to 1.52 and then add 2.8v to the VDDA and then see where it goes?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top