Overclock.net banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,723 Posts
Discussion Starter · #1 ·
[All these values are measured in CPU-Z]

Trying to figure this out: does the stock E8500 core voltage dance around from 1.088 to 1.200V normally?

I manually set the core multiplier to 9.5x but for some reason it's dancing from 6x to 9.5x, and in doing so the core speed drops from 2000.3 and raised back to 3172.6Mhz. It refuses to stay at 3.1Mhz.

Went back in BIOS and reset to defaults (with AI Overclocking all on auto), and it still dances wildly. Currently I've manually set the multiplier to 9.5x and the memory to DDR2-1066 (5-5-5-18 2T settings), and it doesn't matter it's still all over the map. Even the Corsair Dominator manual overclock settings don't matter.

Is this how this E8500 suppose to operate?
 

· Registered
Joined
·
1,723 Posts
Discussion Starter · #5 ·
Quote:

Originally Posted by Demented View Post
Disable C1E and/or SpeedStep in your Bios. Also, you may or may not want to enable LoadLine Calibration to help the voltage fluctuations.
Thank you, thank you, thank you!!

Now it's at 1.232v stable.


Even better, Vista loaded from login to desktop in about 2 secs. And Folding temps are dancing only by 2F (instead of 5 to 10F).

Rep+
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top