Overclock.net banner
1 - 5 of 5 Posts

·
Banned
Joined
·
74 Posts
Discussion Starter · #1 ·
went to change ratio to 1:1 wasnt available in bios. so set timings back to auto(still same values, defualt 3559). save restart wouldnt load windows got cursor flash at top left. restart and wont see 2 sticks at same time. both are still good tho cuz tried them individually and worked. if i put in 2 sticks it either doesnt see one or wont boot.

???????????????????????????????????????????

i guess im on my own
thx
 

·
Banned
Joined
·
74 Posts
Discussion Starter · #3 ·
i did, took out cmos for, well not very long, iknow u have to wait for ambeint energy to dissapate but ive seen it done in the same amount of time, but i will wait longer(actually the bios reset is self after i got a blue death for about half a second)
an hour or so should do it

well tried reseting bios about 5 times still didnt help, i can use each individual stick and it boots to OS, but if i use both it only sees one
CAN SOMEONE PLEASE HELP ME THIS MAKES NO SENSE TO ME WHAT SO EVER

something is seriously wrong here guys everytime i restart and come in here i only see my original post with 3 views and no replies although i have altered and replied about 3 times along with others
can someone tell me what the HELL is goin on with my system
 

·
Registered
Joined
·
604 Posts
Are you running the RAM dual channel with different types of RAM? If so put them in non-dual channel slots or take it out of dual-channel in the BIOS if that's an option.
 

·
Banned
Joined
·
74 Posts
Discussion Starter · #5 ·
wow yall im really at a loss here, this was the strangest set of circumstances ive ever encountered here it goes full story:
read the timing ram article so i went to change timings to 2 2 2 7 or something like that had several unstable shutdowns and restarts, then bios reset ITSELF!!!!!, then it wouldnt boot no post nothing, so took one stick out, booted to OS fine, so i put other stick in by itself worked fine, put both in no boot, i ended up haveing to flash my bios and change timings about 3 times before it finally picked it up, now running both sticks but only at 310???? another oddity but i will deal with it later
thx anyway guys
 
1 - 5 of 5 Posts
Top