Overclock.net banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1,349 Posts
Discussion Starter #1
If I go to anymore than 300x9, my system will perform SLOWER than it does at HALF stock, but I can do 300x9 at 1.25V, is it my board, or my processor causing the problem?
 

·
Registered
Joined
·
1,095 Posts
have you disabled your EIST, C1E and TM2? if not then when you oc, your multiplier, vcore, and speed will be adjusted without your control..

Read my thread.. Its long but has a ton of info on E4300's.. Pay attention to the Overclocking section in the first post.. This thread has all your answers..

E4300 Information Thread

Good luck..
 

·
Registered
Joined
·
1,095 Posts
One question tho..

How is it you have a 9200se on a PCIe motherboard? Did you use a hammer to make it fit?
 

·
Registered
Joined
·
3,499 Posts
it's easy you take the video card find and open one of the three pci slots and insert card there. it's just like putting a pcie card in other then you use a different style slot for it.
 

·
Registered
Joined
·
1,095 Posts
Quote:

Originally Posted by rx7speed View Post
it's easy you take the video card find and open one of the three pci slots and insert card there. it's just like putting a pcie card in other then you use a different style slot for it.
LMAO...


I forgot they still make those in just PCI.. All my knowledge and I ask a questions like that..Looks like another night of flagellations for me....lol

Flagellation [flaj-uh-ley-shuhn] -noun
1. a religious act in which the participants receive religious stimulation from whipping themselves...

Just so no one thought I meant an evening of farting..
 

·
Registered
Joined
·
1,095 Posts
Quote:

Originally Posted by rx7speed View Post
but man even with your description I'm getting some bad bad thoughs.

Ya I pulled the difenition from an online dictionary.. Sounds a little sexual.. I never thought those guys who "whip" themselves for the Lord did it to "get off"... You should have read the others ...lol
 

·
Registered
Joined
·
1,349 Posts
Discussion Starter #8
Quote:


Originally Posted by MuNcHeR23
View Post

have you disabled your EIST, C1E and TM2? if not then when you oc, your multiplier, vcore, and speed will be adjusted without your control..

Read my thread.. Its long but has a ton of info on E4300's.. Pay attention to the Overclocking section in the first post.. This thread has all your answers..

E4300 Information Thread

Good luck..


Yes indeed I have.
 
1 - 8 of 8 Posts
Top