Silverstone TJ07
Suggest a case for modding/ water coolin
1 - 20 of 46 Posts
Quote:
I thought about it, but isn't it all one big hunk of metal? Seems like that would be hard to mod... will look into it though.
Also is there an adapter for triple rads or something? Looks like the stock accomodates just double.
Originally Posted by spaceballsrules  Silverstone TJ07 |
Also is there an adapter for triple rads or something? Looks like the stock accomodates just double.
This is a case that screams mod me.
![]()
LIAN LI PC-A71B Black Aluminum ATX Full Tower
Antec 1200 triple rad would fit up front very nicely. Might be my next case. Of course i was able to fit a triple rad in the 300
![]()
There is a lot of full towers that fit your description. How much are you wanting to spend?
There is a lot of full towers that fit your description. How much are you wanting to spend?
antec 1200 or CM cosmos 1000 for cheapy, or some expensive lian li or silverstone
![]()
Quote:
Triple rad at the bottom. Possible to also fit a quad with a squeeze
![]()
![]()
Originally Posted by NoodleGTS I thought about it, but isn't it all one big hunk of metal? Seems like that would be hard to mod... will look into it though. Also is there an adapter for triple rads or something? Looks like the stock accomodates just double. |
3
6
Cosmos S
![]()
Quote:
I like.... only thing is that it's close enough to the TJ-07 that I would pick the TJ instead because of its rivet free design.
Originally Posted by Mmansueto Lian Li V2000 here |
Rocket Fish gets another vote for W/C and Mod friendly
![]()
There are sveral members here that have done some excellent W/C mods with them!
There are also several members here that have unmolested BNiB ones "just sitting"!
Throw a post up in the wanted section...see if you get any joy.. can't hurt right?
Much cheaper than a "proper" Lian-Li"
![]()
Cheers & GL
![]()
There are sveral members here that have done some excellent W/C mods with them!
There are also several members here that have unmolested BNiB ones "just sitting"!
Throw a post up in the wanted section...see if you get any joy.. can't hurt right?
Much cheaper than a "proper" Lian-Li"
Cheers & GL
3
Quote:
Thanks, but reminds me too much of my fridge...
I think TJ-07 is the winner so far but air cooling my GPUs in that case really scares me. Can anyone attest to the GPU air-cooling power of this otherwise awesome case?
Originally Posted by SpcCdr Rocket Fish gets another vote for W/C and Mod friendly
There are sveral members here that have done some excellent W/C mods with them! There are also several members here that have unmolested BNiB ones "just sitting"! Throw a post up in the wanted section...see if you get any joy.. can't hurt right? Much cheaper than a "proper" Lian-Li"
Cheers & GL
|
I think TJ-07 is the winner so far but air cooling my GPUs in that case really scares me. Can anyone attest to the GPU air-cooling power of this otherwise awesome case?
4
Quote:
Well I would have to get a new rad, at least a double. Don't know where I would put that.. would it fit down bottom? Also you've got the added expense of the rad and waterblocks. And finally, I figured of all things GPUs would be swapped out most often so I like to keep them easy to remove, if necessary. I also don't want to get water blocks for my GTX280s, and then have them become obsolete and be stuck with over $100 in obsolete cooling equipment.
I saw a cool mod somewhere where a guy took 2 of the antec 900 drive cages and used them up front to create 2 120mm intake fans. Also creates a nice place to store HDDs. Not a bad idea, except it would eliminate one of my optical drives, and I sure do like my dual optical drives.
EDIT - I also don't understand this: how is the rad SECURED at the bottom of the case. I know there's enough room to just plop it in, but are there some holding screws through the bottom or something else that it can attach to? Or do I have to come up with some DIY mounting technique?
Originally Posted by alex98uk Why do you not want to watercool your graphics card? |
I saw a cool mod somewhere where a guy took 2 of the antec 900 drive cages and used them up front to create 2 120mm intake fans. Also creates a nice place to store HDDs. Not a bad idea, except it would eliminate one of my optical drives, and I sure do like my dual optical drives.
EDIT - I also don't understand this: how is the rad SECURED at the bottom of the case. I know there's enough room to just plop it in, but are there some holding screws through the bottom or something else that it can attach to? Or do I have to come up with some DIY mounting technique?
1 - 20 of 46 Posts
