I remember reading somewhere that the best way to mount a gtz is to align the letterning on the block with the socket lever. Can't find this info anymore, but my gut feelnig says I remember reading this before. Can anyone correlate this, or am I just imagining things?
Swiftech gtz 1366 orientation
1 - 2 of 2 Posts
You may be recalling the instructions for mounting with regard to the 775 socket-
Look at the GTZ page on Swiftnets (scroll down)
When they released the 1366 brackets they said do not use the same orientation in reference to the locking bar- (as it has moved from the bottom to the right)
Rather, that you should always mount the block so that the GTZ lettering appears in a "normal" "upright" orientation.
Cheers
![]()
Look at the GTZ page on Swiftnets (scroll down)
When they released the 1366 brackets they said do not use the same orientation in reference to the locking bar- (as it has moved from the bottom to the right)
Rather, that you should always mount the block so that the GTZ lettering appears in a "normal" "upright" orientation.
Cheers
1 - 2 of 2 Posts
Join the discussion
