Overclock.net banner

21241 - 21260 of 21297 Posts

·
Gamer
Joined
·
1,732 Posts
I just do it cause I like to get free stuff lol
Free is great but if it's PC related free...i don't even have time to change 4 year old liquid :(
 

·
Gamer
Joined
·
1,732 Posts
Cost of fittings is ridiculous, think goodness for barrow, bitspower have lost their minds. But jeez takes a month to get barrow fittings
I got few elbows from bitspower and the rest orered from swiftech.
 

·
I Like Beer
Joined
·
7,795 Posts
Cost of fittings is ridiculous, think goodness for barrow, bitspower have lost their minds. But jeez takes a month to get barrow fittings
I got few elbows from bitspower and the rest orered from swiftech.
Yea I need like 4 90s for the front res so everything gets some fluid. But that can wait, I’m not doing the front res until RTX 3xxx cause I can’t bring myself to remove the cooler on the Aorus rtx 2080 super
 

·
Gamer
Joined
·
1,732 Posts
Yea I need like 4 90s for the front res so everything gets some fluid. But that can wait, I’m not doing the front res until RTX 3xxx cause I can’t bring myself to remove the cooler on the Aorus rtx 2080 super
Well, the cost and time replacing my old TXP for any of the RTX cards is useless for me now. I do no work on it it's just an entertainment unit and only 3 main games Borderlands 3, NFS Heat and Forza, all run at the highest settings w/o issues. I'll be looking into upgrade sometime at the end of this 2020 year after new nvidia release and the war between intel & amd settles ;)
 

·
I Like Beer
Joined
·
7,795 Posts
Mounted to n back side of Lian Li dynamic gonna run it in threw the removable HHD bay in the back... bad pic and raw atm
Got the alphacool XT45 mounted inside as well
 

Attachments

·
Registered
Joined
·
3,660 Posts
Does anyone know if the H360X3 Drive X3s pump is powerful enough to handle 2 360mm rads and a Watercooled 2080Ti?
 

·
Shooting down fallacies
Joined
·
8,206 Posts
Does anyone know if the H360X3 Drive X3s pump is powerful enough to handle 2 360mm rads and a Watercooled 2080Ti?
Absolutely. That is exactly what it was designed for,
 

·
Registered
Joined
·
3,660 Posts

·
Shooting down fallacies
Joined
·
8,206 Posts
Awesome great to hear I bought the H360X3 instead of the EK-MLC Phoenix 360, though I bet they'd be similar in performance?
The Swiftech has a better pump, and is easier to refill and expand. Performance is similar, but the stock Swiftech fans really hinder it.
 

·
Registered
Joined
·
3,660 Posts
The Swiftech has a better pump, and is easier to refill and expand. Performance is similar, but the stock Swiftech fans really hinder it.
Ya I’m using the stock fans right now and they don’t seem to push a lot of air through the rad. I’m trying to research which fans to go with but there’s an overwhelming selection LOL.

Would you be able to recommend something that’s good for radiators?

Thank you
 

·
I Like Beer
Joined
·
7,795 Posts
I’m doing 3 360s rads myself the h360 + 2 more, with that much rad you can get away with avg fans,
I kept the stocks on the h360 and using Corsair hd120s on one 360 and LL120s on another,
I’ll audibly adjust them till I can’t hear them, then leave them there lol
 

·
Shooting down fallacies
Joined
·
8,206 Posts
Ya I’m using the stock fans right now and they don’t seem to push a lot of air through the rad. I’m trying to research which fans to go with but there’s an overwhelming selection LOL.

Would you be able to recommend something that’s good for radiators?

Thank you
A lot of that is going to depend on whether or not you find the RGB a necessity. If so.....the only decent RGB fan I am aware of is the Corsair ML120. If you don't need RGB, the Noctua NF-A12X25 is the vest of the best, be quiet Silent Wings 3 being another top choice. If you are looking for something a little more budget friendly (I think....I know pricing in Canada is really wonky), there is the Phanteks F120MP or Arctic P12. And....keep in mind that you can go with any of these fans with no RGB and add Phanteks Halo frames for the best of all worlds.
 

·
Registered
Joined
·
3,660 Posts
I’m doing 3 360s rads myself the h360 + 2 more, with that much rad you can get away with avg fans,
I kept the stocks on the h360 and using Corsair hd120s on one 360 and LL120s on another,
I’ll audibly adjust them till I can’t hear them, then leave them there lol
That's insane. Did you see a big improvement when adding a third rad or did you start with 3 from the from the get-go?

A lot of that is going to depend on whether or not you find the RGB a necessity. If so.....the only decent RGB fan I am aware of is the Corsair ML120. If you don't need RGB, the Noctua NF-A12X25 is the vest of the best, be quiet Silent Wings 3 being another top choice. If you are looking for something a little more budget friendly (I think....I know pricing in Canada is really wonky), there is the Phanteks F120MP or Arctic P12. And....keep in mind that you can go with any of these fans with no RGB and add Phanteks Halo frames for the best of all worlds.
I don't really care for RGB since its going to be in a ''push'' configuration on the H360X3 and wont see it. I really want those Noctua NF-A12X25 but at $40 for one in Canada LOL! I'll have to settle for the P12.
I have my H360X3 on top pushing air into the case and the other 360 rad pushing air in also, I'll probably push/pull the other rad to compensate for the poor performance of the helix 120 iris.

Thanks for the assistance. +Rep
 

·
Premium Member
Joined
·
27,124 Posts
That's insane. Did you see a big improvement when adding a third rad or did you start with 3 from the from the get-go?



I don't really care for RGB since its going to be in a ''push'' configuration on the H360X3 and wont see it. I really want those Noctua NF-A12X25 but at $40 for one in Canada LOL! I'll have to settle for the P12.
I have my H360X3 on top pushing air into the case and the other 360 rad pushing air in also, I'll probably push/pull the other rad to compensate for the poor performance of the helix 120 iris.

Thanks for the assistance. +Rep
Just a caution, if you have 6x 120mm vents and fans pushing air into case through radiators you also need similar 6x 120mm vents letting that 6x of air out of case. If case only has 3x 120mm vents for exhaust then the 6x 120mm intakes can only move as much air into the case as the 3x exhaust vents can let out. A case can only flow as much air in as it can flow out .. whichever is smaller (intake vs exhaust area) limits the maximum case airflow. There can't be more air going into the case than is coming out of it .. simple physics. ;)
 

·
Shooting down fallacies
Joined
·
8,206 Posts
Just a caution, if you have 6x 120mm vents and fans pushing air into case through radiators you also need similar 6x 120mm vents letting that 6x of air out of case. If case only has 3x 120mm vents for exhaust then the 6x 120mm intakes can only move as much air into the case as the 3x exhaust vents can let out. A case can only flow as much air in as it can flow out .. whichever is smaller (intake vs exhaust area) limits the maximum case airflow. There can't be more air going into the case than is coming out of it .. simple physics. ;)
What if he has six 120mm fans as intakes going through rads with the fans spinning at 750rpm....while having three 120mm exhaust which are mostly unimpeded running at 2500 rpm? ;)

Mind you, I do agree with you that there should be actual airflow for the case rather than everything just blowing air in. And your simple physics are simply correct.
 

·
Premium Member
Joined
·
27,124 Posts
What if he has six 120mm fans as intakes going through rads with the fans spinning at 750rpm....while having three 120mm exhaust which are mostly unimpeded running at 2500 rpm? ;)

Mind you, I do agree with you that there should be actual airflow for the case rather than everything just blowing air in. And your simple physics are simply correct.
So you suggest running exhausts 2x or 3x fans at 4x or 8x higher noise levels than 6x intake fans on radiator? Wouldn't it make more sense to have one 360mm rad as intake and one as exhaust?

But seriously, isn't ntuason using a Lian Li PC-011 Dynamic case with four 3x 120mm vent sets, one in bottom and two on right side near front and one in top, plus 2x 80mm vents in back over motherboard I/O. He should be fine with just the 6x good intake/radiator fans as intake, although I would consider using them as exhaust and keep case air temp lower so all components that are not under waterblocks have optimal cooling. :thumb:
 

·
ٴٴٴ╲⎝⧹˙͜>˙⧸⎠╱
Joined
·
6,316 Posts
Does anyone know if the H360X3 Drive X3s pump is powerful enough to handle 2 360mm rads and a Watercooled 2080Ti?
Swiftech says yes.
Absolutely. That is exactly what it was designed for,
Awesome great to hear I bought the H360X3 instead of the EK-MLC Phoenix 360, though I bet they'd be similar in performance?



Some concern on this too.



I want to build a custom loop but unsure if I should keep anything from my DriveX3, rather than just buy a new pump/res+360 rad to go along with it. Or maybe I should just swap the waterblock for an Optimus AM4 one.












The Swiftech has a better pump, and is easier to refill and expand. Performance is similar, but the stock Swiftech fans really hinder it.
Ya I’m using the stock fans right now and they don’t seem to push a lot of air through the rad. I’m trying to research which fans to go with but there’s an overwhelming selection LOL.

Would you be able to recommend something that’s good for radiators?

Thank you

I swapped the swiftech fan for Gentle Typhoon 2150s and drop temp around 6-8c on full load.



X99 5820K 4.5G, ~220-240w.


I found out those Helix stuff are just really cheap chinese fans that everyone is rebranding and selling.
 

·
I Like Beer
Joined
·
7,795 Posts
Just waiting on my QDC to get here.
Looks clean to me 🙂

3 360’rads so I can run all fans at minimum speed, that’s the only reason.
 

Attachments

21241 - 21260 of 21297 Posts
Top