Overclock.net banner

1 - 5 of 5 Posts

·
Registered
Joined
·
527 Posts
Discussion Starter #1
Thermaltake Silent PurePower, 420W ATX power supply.UL, CSA, TUV, CE Approved. Intel Pentium 4 Compliant.

Good thermaltake? has no pfc

Specifications:
Type: ATX
Maximum Power: 420W
PFC: No
Power Good Signal: 100-500ms
Hold-up Time: >16ms at Full Load
Efficiency: >65%
Over Voltage Protection: +5V trip point<+6.8V;+3.3V trip point<+4.5V;+12V trip point<+15.6V
Overload Protection: Not specified
Input Voltage: 115 VAC / 230VAC
Input Frequency Range: 47-63 Hz
Input Current: 10.0A (Measuring 90-132Vrms);5.0A (Measuring 180-264Vrms)
Output: [email protected];[email protected];[email protected];[email protected];[email protected];[email protected]

its going to be running a 2.6ghz northbridge....2 ide harddrives...2 optical...a 6-1 media reader...1 floppy ...4-5 fans...and a powercolor 9800 NP
is it gonna be alright?
 

·
Registered
Joined
·
527 Posts
Discussion Starter #2
and reason im getting a new one is to support the new 9800 im getting and my old one is a bestec not antec but bestec 250w and im getting bad reading i think..

Voltage Values
CPU Core 1.46 V
+1.5 V 1.52 V
+1.8 V 1.77 V
+2.5 V 2.47 V
+3.3 V 3.32 V
+5 V 5.00 V
+12 V 11.75 V
 

·
Premium Member
Joined
·
13,844 Posts
have you read any reviews on it? google the part, and look for reviews.. you should be able to find some and see what they give it as far as points go... look for their section on rail stability.. you don't want a fluctuating rail

Quote:

Originally Posted by thehacker11
and reason im getting a new one is to support the new 9800 im getting and my old one is a bestec not antec but bestec 250w and im getting bad reading i think..

Voltage Values
CPU Core 1.46 V
+1.5 V 1.52 V
+1.8 V 1.77 V
+2.5 V 2.47 V
+3.3 V 3.32 V
+5 V 5.00 V
+12 V 11.75 V
 

·
Registered
Joined
·
527 Posts
Discussion Starter #5
heeeeeeeeeeey thats good to know blob! thanks was it easy to install? im on a hp a250n it looks like a removable 250w bestec standard size? u think its easy to install?
 
1 - 5 of 5 Posts
Top