[Open1Your1Eyes0]

Are these decent results?

 

[Darren9]

They are decent. Your loosing under 10% to overhead which is pretty good for a 3 disk raid on onboard. I don't think it will go any faster.

 

[Open1Your1Eyes0]

Quote:

Originally Posted by Darren9 They are decent. Your loosing under 10% to overhead which is pretty good for a 3 disk raid on onboard. I don't think it will go any faster.

You mean the -1.0% CPU? I think that's a glitch. I've seen that on many systems.

 

[Darren9]

Quote:

Originally Posted by Open1Your1Eyes0 You mean the -1.0% CPU? I think that's a glitch. I've seen that on many systems.

I ment 1 disk runs about 100MB/s average and 125MB/s max, so x3 for three disks wolud be the "prefect" raid0 but you always lose some performance due to controller overhead. Within 5-10% of the max is a good result.

 

[Open1Your1Eyes0]

Quote:

Originally Posted by Darren9 I ment 1 disk runs about 100MB/s average and 125MB/s max, so x3 for three disks wolud be the "prefect" raid0 but you always lose some performance due to controller overhead. Within 5-10% of the max is a good result.

I'm especially liking how stable the continuous run was. No odd dips here and there like in many other results I've tested.