Overclock.net banner

1 - 11 of 11 Posts

·
Registered
Joined
·
224 Posts
Discussion Starter · #1 ·
Hi

Well it seems like my memory is makin my comp instabil whit prime

Running the memory att 400 mzh whit timing 6.2.2.2,5 now and it crashes in prime

if i turn down to 133mhz its fine.

Running 2.77 volt on mems

uhm tried running 7.2.2.2,5 and 400mhz crash after 5 min lol

god okej runnin 7.3.3.2,5 now att 2.77 volt and no crash for 10 min LOL im on test nr 2 now

Multi is 133x11.5 erm 1730 mhz

Uhm changed to 166x10.5 =1740 mhz Vcore default 1.65 400mhz mem 7.2.2.2,5 timings.No crash for 10 min. Im da nOOb =D when i raise FSB and keep same clock speed on FSB do i need to raise vcore? =P
 

·
Registered
Joined
·
516 Posts
Quote:


Originally Posted by Sper

Hi

Well it seems like my memory is makin my comp instabil whit prime

Running the memory att 400 mzh whit timing 6.2.2.2,5 now and it crashes in prime

if i turn down to 133mhz its fine.

Running 2.77 volt on mems

uhm tried running 7.2.2.2,5 and 400mhz crash after 5 min lol

god okej runnin 7.3.3.2,5 now att 2.77 volt and no crash for 10 min LOL im on test nr 2 nowif its crashing

Multi is 133x11.5 erm 1730 mhz

Uhm changed to 166x10.5 =1740 mhz Vcore default 1.65 400mhz mem 7.2.2.2,5 timings.No crash for 10 min. Im da nOOb =D when i raise FSB and keep same clock speed on FSB do i need to raise vcore? =P

a little wont hurt but it sounds like its gettin hot to me and shutting doown.be carefull dude.
 

·
Registered
Joined
·
224 Posts
Discussion Starter · #3 ·
Quote:


Originally Posted by Ge-Force

a little wont hurt but it sounds like its gettin hot to me and shutting doown.be carefull dude.

uhm okej i ran prime 95 torture for 2hours whit these settings whitout error

9x200 =1800mhz
Memory timings 7.3.3.2,5 400mhz
Full load on cpu was 47cel

It seems like it was the memory timings that made my comp instabil.

Gonna run Prime over night for 12 hours atleast
 

·
Premium Member
Joined
·
45,674 Posts
Are you watching your temps??? You have some good speeds but what temps are you seeing in the System and CPU? Do you have good case (system) temps = good air flow in and out?
 

·
Registered
Joined
·
224 Posts
Discussion Starter · #5 ·
Quote:


Originally Posted by The Duke

Are you watching your temps??? You have some good speeds but what temps are you seeing in the System and CPU? Do you have good case (system) temps = good air flow in and out?

I ran Prime 95 torture test tonight for 10 hours 0 Error and 0 Warnings
Max Cpu temp 46 celsius
Max Case 34C
Motherboard 27c
 

·
Registered
Joined
·
49 Posts
Hey,

I also have 2 x 256MB Twinmos DDR400/PC3200.....My computer crashes when I run them at 200MHz...my system is stable when I run at 166MHz...

I dont know what the problem is but it sucks.....next time I'll take Kingston...
 

·
Banned
Joined
·
2,222 Posts
id invest in a zalman CNPS7000 for your CPU and some arctic silver ceramique to keep your CPU temps right down, id also up the vdimm on your memory to 3v and then go from there. updating your mobos bios will help too.
 

·
Registered
Joined
·
49 Posts
Quote:

Originally Posted by Ket
id invest in a zalman CNPS7000 for your CPU and some arctic silver ceramique to keep your CPU temps right down, id also up the vdimm on your memory to 3v and then go from there. updating your mobos bios will help too.
Hey Ket,

was that information for me....???
 

·
Premium Member
Joined
·
45,674 Posts
Looks like you'r going to have to try a CAS3 config if you want to get higher FSB speeds!
 

·
Registered
Joined
·
49 Posts
Quote:


Originally Posted by The Duke

Looks like you'r going to have to try a CAS3 config if you want to get higher FSB speeds!

CAS3?? Sounds like abacadabra to me......sorry
 

·
Banned
Joined
·
2,222 Posts
Quote:


Originally Posted by Firewurx

Hey Ket,

was that information for me....???

for anyone with enough room for a 92mm fan for either A64\\AXP or intel skt478
 
1 - 11 of 11 Posts
Top