Overclock.net banner
1 - 10 of 10 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hi
I have Sapphire 5850 Vapor-X and today I changed bios to MSI R5850 unlock bios.
After reinstall drivers to latest everything is ok :

ckp.png


but in MSI Afterburner I don't have voltage control :

afterburnert.jpg

I try modification MSIAfterburner.cfg but it not work.

What I'm doing wrong ?
 

·
Registered
Joined
·
279 Posts
Make sure you are running the latest version which is 2.2.0 beta 2.

If that does not work, then your card probably does not support voltage control since the voltage regulator is not supported by MSI AB or etc..
 

·
Turtle Lives Matter
Joined
·
5,030 Posts
That card probably does not have the right voltage regulator. Vapor-x is notorious for that. Nice cooling, then cheap out on the PCB.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #6 ·
Quote:
Originally Posted by xsever;12985787
Make sure you are running the latest version which is 2.2.0 beta 2.

If that does not work, then your card probably does not support voltage control since the voltage regulator is not supported by MSI AB or etc..
On MSI Afterburne 2.2.0 Beta 2 there is on difference.
If the card not support voltage what happens when I flash 5870 bios ?

I saw that people can change voltage on normal sapphire with msi 5850 unlock bios.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #8 ·
Quote:
Originally Posted by mikepahl318;12986082
This is what you have to di in teh .cfg file

[ATIADLHAL]
UnofficialOverclockingEULA= I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode= 1
AccessibilityCheckingPeriod= 0
In MSI Afterburne 2.2.0 Beta 2 there are two files MSIAfterburner.cfg
First here -> C:\Program Files (x86)\MSI Afterburner
Second -> C:\Program Files (x86)\MSI Afterburner\Profiles

I try to change both files but nothing changed.
 

·
Registered
Joined
·
452 Posts
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top