Overclock.net banner
1 - 7 of 7 Posts

·
Registered
Joined
·
486 Posts
Discussion Starter · #1 ·
i need to do some changes in my rig and i was wondering if i unplug all my wires even on the HD would i lose my raid 0 setup?
 

·
Intel Extreme 1366
Joined
·
1,665 Posts
I think as long as the drives are in it's original ports...including where it was...on the motherboard or raid card...you should be good.

EDIT...I recommend other opinions before you do though
 

·
Registered
Joined
·
2,167 Posts
no you won't. it'll recognize the drives when you put them back. just try to put the sata cables in the same place.
 

·
Registered
Joined
·
1,101 Posts
As long as you don't unplug while it's running and make sure the power is off it should be ok
 

·
Linux Lobbyist
Joined
·
3,745 Posts
You don't list your OS in your sig, but assuming you're not running GNU/Linux (which has RAID auto-detect), then you'll be fine as long as you plug the drives back into their original ports.
 
1 - 7 of 7 Posts
Top