[S.M.]

I can't get USB 2.0 to work I guess.

Everytime I plug in a USB device I get the performance pop-up reminder. I overlook all my ports and they all register as 1.0.

They did so on my mainboard disk driver, biostar website driver, and windows 7 auto driver.

Any help?

 

[Ovlovian]

Try Bios Update.
http://www.biostar.com.tw/app/es/t-s...s.php?S_ID=360

Also, try Windows 7 update.

 

[compuman145]

A. You have 1.1 and 2 on the back of the computer
B. You have 1.1 Enabled in your bios
C. You're using a USB 1.1 Cable on a USB 2.0 device

 

[Ovlovian]

Quote:

Originally Posted by compuman145 A. You have 1.1 and 2 on the back of the computer B. You have 1.1 Enabled in your bios C. You're using a USB 1.1 Cable on a USB 2.0 device

I assumed you'd eliminated these things already. Good point Compuman

 

[BIGGUN]

Quote:

Originally Posted by compuman145 C. You're using a USB 1.1 Cable on a USB 2.0 device

Heck I thought they were all the same.

 

[compuman145]

They are pretty much all the same, it comes down to the quality of the cable. For example, you buy a piece of crap cable for $1.50 and it'll (probably) do 1.1. You buy a cable for $15 it will probably do 2.0, it's just not guaranteed.

 

[S.M.]

Quote:

Originally Posted by compuman145 A. You have 1.1 and 2 on the back of the computer B. You have 1.1 Enabled in your bios C. You're using a USB 1.1 Cable on a USB 2.0 device

500 gold stars for this guy.

I can't believe USB2.0 host controller would be disabled from factory. Not to mention it was DEEP in my bios.

 

[compuman145]

Yay me